W1222 Datasheet, PDF (1/3 Pages) Lumins Inc. – Wall mount

L UMINIS
Specification
SYRIOS
W1222
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
1
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
2
fluorescent socket.
- One-piece molded silicone gasket with memory retention.
3
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
4
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
5
1- Cast aluminum ballast housing.
Alternate model with internal lamp adjustability
allowing a 358º rotation X 30º tilt from vertical
position with P39/P70/P100 H.I.D. sources.
2- Cast aluminum modular optical light chamber.
3- Semi-specular aluminum reflector.
4- Clear tempered lens.
5- Cast aluminum sealed lens frame.
Note:
W1222 series is a modular luminaire offered
with an array of standard or optional
attachments, to meet multiple installation
requirements. Please specify desired
mounting accessory with model number.
(Refer to page127)
W1222S : 18” dia. Full cutoff aluminum shade.
W1222L : Set of three cast aluminum louver blades.
14 1/2”
20”
18 1/2”
9 1/2”
W1222
EPA: 0.37
18”
W1222S
EPA: 0.48
W1222L
EPA: 0.41
Photometry
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 www.luminis.com.
60
Certification
UL. Wet Location.
Model# Mounting
Mounting
Max. weight: 27 lbs.
Light source selection
Voltage
30
Finish
Please refer to pages
127 &128 for additional details.
Options
W1222
W1222S
W1222L
APA2
ACA2
ACW2
APS2
APC2
S
T2
W2
MH (ED17) CF (Gx24q)
M70
M100
M150
M175
Single lamp
F142
F157
CF (Gx24q)
HPS (ED17) Two lamp
H70
H100
H150
PAR lamps
F226
F232
PH39 (PAR20)
PH70 (PAR30L)
PH100 (PAR38)
Adjustable
lamps
(Lamps by others)
120 V Standard
factory prewired
(If no voltage is
specified)
For other voltages,
please specify with
catalog number.
H.I.D.
208 V
240 V
277 V
347 V
Compact
fluorescent smart
ballast 120/277
347 V
(To specify)
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
STM60:
STM80:
STC:
SW45:
Mounting
60” lg.suspension stem.
80” lg.suspension stem.
Safety cable.
45º hang straight swivel.
EM42S:
FS:
PH1:
PH2:
QS:
QRS:
Electrical
1 lamp (26/32/42W)
Fuse
120/277V photo cell.
347V photo cell.
Standby lamp socket.
H.I.D. lamp restrike
EM42S option is available with
-S / -W2 / ACW2 / -T Mounting
styles.
EM optional battery test switch and
pilot lamp are installed remotely.
(See page 103)
M150- M175 & H150 are only available with dedicated 5” dia. poles
Ballast located in line at post top, with easily removable tray.
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 119
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007