English
Language : 

W110 Datasheet, PDF (1/2 Pages) Lumins Inc. – Heavy cast aluminum top cover with embedded heat sink.
W110
ECLIPSE - LED
Type:
QUANTITY:
Project:
Catalog
number:
Fixture
Wattage
Voltage
Finish
Option
Option
Option Option
W110
1
1- Heavy cast aluminum top cover with
embedded heat sink.
2- Ø 8” (203) High impact white translucent
acrylic diffuser UV stabilized.
2
3- LED strip
4- Cast aluminum upper base with built-in
hinge mechanism.
5- Cast aluminum driver housing.
6- Ø 8” (203) Extruded aluminum column
with built in cast inner mounting base
3
plate and acces cover.
8”
(203)
W110-C216
48”
(1220)
W110-C192
A
8 Ft. W110-C96 96” (2438)
4
W110-C168
10 Ft. W110-C120 120” (3000)
5
W110-C144
12 Ft. W110-C144 144” (3657)
14 Ft. W110-C168 168” (4267)
16 Ft. W110-C192 192” (4876)
A
W110-C120
18 Ft. W110-C216 216” (5486)
6
W110-C96
18”
(457)
Materials
Eclipse is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%.
LED is contained in a white UV stabilized high impact acrylic sealed cylinder. The
assembly is designed to provide a uniform column illumination.
The upper cast aluminum housing is designed with a tool-less hinged
mechanism allowing a quick access for maintenance.
The lower cast aluminum housing contains all electrical controls and is easily
accessible with a hinge mechanism. Eclipse light column is available in 6
standard heights. Other heights are available on request.
ELECTRICAL
LED
DRIVER
120/277V multi volt (50-60HZ) with a minimum starting temperature
of -30ºC/-22ºF. Optional 347V on request. Output over voltage,
output over current and output short circuit protection with auto-
recovery. Over temperature protection (110ºC).
LED
Standard 4000K LED platform included. Optional 3000K and
3500K. Removable modular LED platform.
LIFE
51,000hrs L B (based on IESNA TM-21 Test Method and LM-80 data).
77 50
68,000hrs L B (calculated projection from LM-80 data).
70 50
FINISH
Five-stage preparation process including preheating of cast aluminum parts for air
extraction, and an environmentally friendly alloy sealant. Polyester powder coating
is applied through an electrostatic process and oven cured for long term finish.
Mounting
Eclipse is designed for ease of access and installation.
The inner cast aluminum base plate is secured with a set of (4) 3/4”-13
galvanized anchor bolts. Accessibility is done through a flush mount 4”X7”
(100X178) hand hole cover plate. No external visible mounting hardware.
Certification
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
Photometric testing performed by an independent laboratory in accordance
with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with
IESNA LM80 standards. CE certification on request.
Rated IP65
Access to
electrical
components
Eclipse features
a unique tool-
less swing out
column assembly,
allowing a quick
access to luminaire
maintenance,
leaving a clean
optical chamber to
ensure a high lumen
performance.
Mounting
8” (200) Dia. base
2” (50) Dia. power
entry opening
5” (127) Dia. bolt circle
LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM