TR1702 Datasheet, PDF (1/3 Pages) Lumins Inc. – Cast aluminum removable top cover for quick maintenance.

TR1701/TR1702
TORX 16 - HID/CFL
Type:
QUANTITY:
Project:
Catalog
number:
Fixture
Wattage
Voltage
Finish
Option
Option
Option Option
TR1701
Ceiling pendant luminaire with a choice
of clear acrylic refractor or an anodized
1
aluminum reflector with two part inner surface
treatment. Upper etched surface combined
2
with multi-faceted specular lower part.
Optional attachments and accessories are
available to customize and adapt each
luminaire to particular design requirements.
1- Standard heavy duty 45º hang straight
3
swivel, with 5” diameter (127) canopy and
universal mounting plate.
2- 7/8” diameter (22) X 36” Lg. (914)
suspension stem. Precut factory stems are ^TR1702
4
available on request. (Specify STM with
desired length)
3- Cast aluminum removable top cover for
quick maintenance.
5
4- Extruded aluminum ballast housing module
with a fine linear stria pattern.
5- Set of four cast aluminum perforated
6
decorative arms.
6- TR1701: Clear acrylic refractor.
TR1702: Aluminum reflector.

Inner surface: High performance
multi-faceted specular anodized.

Exterior surface: Satin anodized
natural aluminum.

Alternate exterior finish
(Option RP6)
MATERIALS
Torx is made of an extruded aluminum ballast housing designed to optimize
functionality of electrical components.
Torx is available with a choice of two interchangeable reflectors.
- A clear acrylic refractor with a linear peripheral pattern providing general
upward illumination with efficient down lighting.
- An aluminum reflector designed to optimize light source performance and
uniformity.
ELECTRICAL
Metal Halide
BALLAST Electronic 120/277V multi volt or 347V (50-60HZ) up to 150W.
Pulse start magnetic ballast for 175W and higher, with a minimum
starting temperature of -22°F/-30°C including end of life
protection.
SOCKET
Medium or mogul base pulse rated 4kV porcelain body with a nickel
plated screw shell and center contact rated 600V. Supplied with
200°C leads.
Compact Fluorescent (CFL)
BALLAST Electronic 120/277V multi volt, or 347V (50-60HZ) with end of life
protection. Minimum starting temperature of 0ºF/-18ºC.
SOCKET Thermoplastic body rated for 75W-600V. Supplied with 105ºC
leads.
FINISH
Polyester powder coating is applied through an electrostatic process and oven
cured for long term finish.
MOUNTING
Maximum weight: 14.5lbs (6.6kg)
Mounts on a standard 4” (102) octagonal electrical box with 3 1/2” (89) C/C
mounting holes.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed damp location.
CE certification on request.
Rated IP41.
36”
(914)
19.6”
(498)¹
16” (408)
19” (482)
1. Dimension for 175MH/PS = Add. 2” (50)
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1