SY600 Datasheet, PDF (1/2 Pages) Lumins Inc. – Cast aluminum ventilated top cover.

Type:
QUANTITY:
Project:
Catalog
number:
Fixture
Wattage
Voltage
Finish
Option
SY600 SERIES
SYRIOS - LED
Wall up or down light
Option Option Option
1
2
3
Vertical
Adjustment
0-30º 0-30º
1- Cast aluminum driver housing.
Includes galvanized steel wall
mount pressure plate.
2- Cast aluminum ventilated top cover.
3- Seamless extruded aluminum
cylindrical housing.
4- Fully sealed cast aluminum light
assembly.
5- Sealed cast aluminum lens frame.
6- Clear tempered glass lens.
7- Faceted specular aluminum reflector.
All stainless steel hardware.
Syrios LED light module is designed with a tilting mechanism allowing
forward and back light adjustability. The ±30º directional module allows
to aim the light beam in the desired direction, without disturbing the
luminaire mounting. The module can be secured using the built in locking
mechanism.
Standard forward and back light throw
4-5-6-7
60º
AR180: Optional 180º angle left and
right side of luminaire.
Other adjustment factory set positions are available. Please consult factory.
Materials
Syrios LED is made of corrosion resistant 356 aluminum alloy with a copper
(CU) content of less than 0.1%.
The main housing is made of seamless extruded aluminum, with an
integrally sealed LED light module designed for optimal heat dissipation,
and lighting performance.
Syrios LED is standard with a unique proprietary design allowing the
sealed LED module to tilt within the cylindrical housing.
The top cast aluminum cover includes ventilation slots allowing air
circulation and cooling of assembly.
Syrios LED SY600 series is standard with 20º optic. See options
section for alternate selection.
Electrical
DRIVERStandard 0-10V dimmable LED driver is 120/277V multi volt
(50-60HZ) with operating temperatures of -30ºC/-22ºF
to 60ºC/140ºF. Output over voltage. Output over current and
output short circuit protection with auto-recovery.
LED Standard 4000K LED engine included. Optional 3000K,
3500K & 5000K. Removable modular LED platform.
Mounting
The mounting plate is designed to fit on a 4” (102) octagonal electrical
box using 3 1/2” (89) C/C mounting holes.
Additional mounting holes are provided as per site requirements.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
Rated IP66. CE Certification on request.
5.00”
(127)
6.00”
(152)
5.00”
(127)
3.25”
(82)
8.75” 5.375”
(222) (136)
Ø 3.50”
(Ø 89)
Ø 1.75”
(Ø 44)
LIFE
54,000hrs L B (based on IESNA TM-21 Test Method and LM-80 data).
74 50
66,000hrs L B (calculated projection from LM-80 data).
70 50
FINISH
Five-stage preparation process including preheating of cast aluminum parts for
air extraction, and an environmentally friendly alloy sealant. Polyester powder
coating is applied through an electrostatic process and oven cured for long
term finish.
5.75”
(146)
8.75”
(222)
11.5”
(292)
11.25”
(286)
(4)
Ø 0.312”
(Ø8)
LUMINIS Toll free: 866.586.4647 Fax: [phone] Email: [e-mail]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
LUMINIS.COM
1