SR620 Datasheet, PDF (1/4 Pages) Jinan Jingheng (Group) Co.,Ltd – SCHOTTKY BARRIER DIODE CHIPS

Luminous
opening
Type:
QUANTITY:
Project:
Catalog
number:
SR620
Fixture
Wattage
Voltage
SR620 SERIES
SCIROCCO - LED
Finish
ELECTRICAL ELECTRICAL MOUNTING
Option
Option
Option
ACCESSORIES
Option
SR620T
1
1- Cast aluminum driver housing.
2- Universal driver tray with twist lock design.
3- Sealed and isolated LED compartment.
2
4- Housing/shade assembly hinge
mechanism.
5- Sealed cast aluminum heat dissipator.
3
6- Set of three cast aluminum louver rings.
7- White translucent acrylic UV stabilized
4
luminous cylinder.
5
8- Structurally reinforced perimeter
aluminum shade. Inner surface is
standard white enamel for increased light
6
performance.
7
9- Borosilicate prismatic heavy glass diffuser.
8
9
23”
(533)
24”
(610)
EPA: 0.95
MATERIALS
Scirocco is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%. The top cast aluminum housing is designed with a
hinged mechanism.
The luminous white translucent cylinder is made of acrylic UV stabilized
contained in a set of three cast aluminum louver rings.
The heavy aluminum shade assembly is designed with a set of perimeter
reinforcement ribs.
The inner surface is standard white enamel for higher light efficiency. The lower
optical assembly includes a sealed borosilicate prismatic glass diffuser, secured
with a silicone memory retention gasket.
ELECTRICAL
LED
DRIVER 120/277V multi volt (50-60HZ) with a minimum starting temperature

of -30ºC/-22ºF. Optional 347V on request. Output over voltage.

Output over current and output short circuit protection with auto-

recovery. Over temperature protection (110ºC).
LED

Standard 4000ºK LED platform included. Optional 3000ºK and
3500ºK. Removable modular LED platform.
LIFE
51,000hrs L B (based on IESNA TM-21 Test Method and LM-80 data).
77 50
68,000hrs L B (calculated projection from LM-80 data).
70 50
Finish
Five-stage preparation process including preheating of cast aluminum parts for
air pocket extraction, and an environmentally friendly alloy sealant. Polyester
powder coating is applied through an electrostatic process and oven cured for
long term finish.
Mounting
Maximum weight: 22.5lbs (10.2kg)
Scirocco is designed as a modular luminaire concept offering a selection of
mounting arrangements for various architectural requirements.
Pole, wall or suspended attachments are proposed with high quality
components to meet multiple installation conditions. (Refer to reverse page)
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
Photometry tested per IES LM-79-08 / IES LM80 test report at 25ºC.
Rated IP65.
Access
to driver
Access to
LED source
Scirocco is designed for ease of access with a double hinge sealed
mechanism isolating the light chamber from the driver compartment
minimizing maintenance handling and possibly damage components.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1