SR615 Datasheet, PDF (1/4 Pages) Lumins Inc. – Cast aluminum ballast housing.

Luminous
opening
Type:
QUANTITY:
Project:
Catalog
number:
SR615
Fixture
Wattage
Voltage
SR615 SERIES
SCIROCCO - HID/CFL
Finish
ELECTRICAL ELECTRICAL MOUNTING
Option
Option
Option
ACCESSORIES
Option
SR615T
1
1- Cast aluminum ballast housing.
2- Universal ballast tray with twist lock design.
3- Sealed and isolated lamp compartment.
2
4- Housing/shade assembly hinge
mechanism.
5- Set of three cast aluminum louver rings.
6- White translucent acrylic UV stabilized
luminous cylinder.
3
7- Structurally reinforced perimeter aluminum
shade. Inner surface is standard white
4
enamel for increased light performance.
5
8- Borosilicate prismatic heavy glass diffuser.
6
7
21”
8
(533)
24”
(610)
EPA: 1.12
MATERIALS
Scirocco is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%. The top cast aluminum housing is designed with a
hinged mechanism.
The luminous white translucent cylinder is made of acrylic UV stabilized
contained in a set of three cast aluminum louver rings.
The heavy aluminum shade assembly is designed with a set of perimeter
reinforcement ribs.
The inner surface is standard white enamel for higher light efficiency. The lower
optical assembly includes a sealed borosilicate prismatic glass diffuser, secured
with a silicone memory retention gasket.
The luminous top shade perimeter is designed with a set of three cast aluminum
louver rings.
ELECTRICAL
High Intensity Discharge (H.I.D)
BALLAST Electronic 120/277V (347V on request) and a power factor greater
than 90%. End of life protection with a minimum starting temperature
of -20ºC/-4ºF.
SOCKET Medium base pulse rated 4KV porcelain body with a nickel plated
screw shell, and center contact rated 600V. Supplied with 200°C leads.
Compact Fluorescent (CFL)
BALLAST 120/277V-50/60HZ multi volt or 347V electronic ballast with end of
life protection. Minimum starting temperature of 0ºF/-18ºC.
SOCKET Thermoplastic body rated for 75W-600V. Supplied with 105°C leads.
Finish
Five-stage preparation process including preheating of cast aluminum parts for
air pocket extraction, and an environmentally friendly alloy sealant. Polyester
powder coating is applied through an electrostatic process and oven cured for
long term finish.
Mounting
Maximum weight: 22.5lbs (10.2kg)
Scirocco is designed as a modular luminaire concept offering a selection of
mounting arrangements for various architectural requirements.
Pole, wall or suspended attachments are proposed with high quality
components to meet multiple installation conditions.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
CE certification on request.
Rated IP65.
Access
to lamp
and ballast
Scirocco is designed
for ease of access
to electrical and
lighting compartment
with a unique hinge
mechanism concept.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1