SR600 Datasheet, PDF (1/4 Pages) Lumins Inc. – Ceiling surface mounting

L U MINIS
Specification
SCIROCCO
SR600
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content. #356 alloy.)
Finish: All polyester powder baked coatings preceded with
1
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
2
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
3
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
4
1- Cast aluminum ballast housing, with built-in hinge mechanism.
2- Set of two cast aluminum clamp retainers.
3- White translucent polycarbonate diffuser.
5
4- Set of two cast aluminum louver blades.
5- Hard aluminum shade with white enamel underside
to maximize light performance.
6- Thermal shock and heat resistant borosilicate frosted
6
heavy glass diffuser, with a prismatic linear inner glass structure.
Photometry
7 1/2”
Note:
SR600 series is modular
luminaire offered with an
array of standard or
optional attachments, to
90
Please refer to pages 101 /102 &
60
103 for additional details.
23”
Certification
E.T.L Wet location
Model# Mounting
SR600
ACA3
ACW3
APA
APC
APS
S
T
WA
21” ^{meet multiple installation}
requirements. Please
specify desired mounting
accessory with model
number.
(See pages 101/ 102)
30
Separate updated
technical specification
sheets with related models
and light sources with I.E.S
formatted photometry are
available on
www.luminis.com.
Weight & EPA
E.P.A: 1.2 sq./ft Max. weight: 31 lbs..
Light source selection
Voltage
Finish
MH (ED17)
M50
M70
M100
M150
M175
HPS (ED17)
H50
H70
H100
H150
CF (Gx24q)
Single lamp
F132
F142
F157
CF (Gx24q)
Two lamp
F226
F232
F242
120 V Standard factory
prewired (If no voltage
is specified)
For other voltages,
please specify with
catalog number.
H.I.D.
208 V
240 V
277 V
347 V
Note:
50W.HPS
is available
with
120/277V
only.
Compact fluorescent
smart ballast 120/277
347 V (To specify)
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
(Lamps by others)
Options
SPB:
SPW:
STM60:
STM80:
STC:
SW45:
TCB:
PC5:
EM42S:
FS:
PH1:
PH2:
QS:
QRS:
Mounting
3ft. black power cord
(3/18-300v with
suspension cable.
3ft. white power cord
(3/18-300v with
suspension cable.
60” lg.suspension stem.
80” lg.suspension stem.
Safety cable.
45º hang straight swivel.
3ft. extended black spiral
power cord.
Accessories
High impact diffuser.
Max.50W
Electrical
1 lamp (26/32/42W)
Fuse
120/277V photo cell.
347V photo cell.
Standby lamp socket.
H.I.D. lamp restrike
Note: EM optional battery test
switch and pilot lamp are installed
remotely. (See pages 101/ 102)
PH1 & PH2 are installed with
luminaire when specified with
C.F.L. sources.
For H.I.D sources PH1 or PH2
are installed with pole only. (see
options APA/APS/ACA3/APC)
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
Page 99