SR400 Datasheet, PDF (1/4 Pages) Lumins Inc. – Ceiling mount

L UMINIS
Specification
SCIROCCO
SR400 . SR410 . SR420
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content. #356 alloy.)
Finish: All polyester powder baked coatings preceded with
1
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
2
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1- Cast aluminum ballast housing, with built-in hinge mechanism.
3
2- Set of two cast aluminum clamp retainers.
3- SR400: White translucent acrylic diffuser 4” X 12” dia.
SR410: Solid aluminum light shield.
SR420: perforated aluminum light shield.
4- Thermal shock and heat resistant borosilicate frosted
heavy glass diffuser, with a prismatic linear inner glass structure.
4
5- One piece cast aluminum star ribbed cage
5
Photometry
Note:
7 1/2”
SR400-410-420 series
90
are modular luminaires
offered with an array of
standard or optional
16” _{attachments, to meet}
multiple installation
SR400
60
30
Separate updated
Please refer to pages 101 /102 &
103 for additional details.
Options
requirements. Please
specify desired mounting
SR410
technical specification
sheets with related models
and light sources with I.E.S
SPB:
Mounting
3ft. black power cord
(3/18-300v with
12”
accessory with model
number.
(See pages 101/ 102)
SR420
formatted photometry are
available on
www.luminis.com.
SPW:
suspension cable.
3ft. white power cord
(3/18-300v with
suspension cable.
STM60: 60” lg.suspension stem.
Certification
Weight & EPA
STM80: 80” lg.suspension stem.
E.T.L Wet location
E.P.A: 0.7 sq./ft Max. weight: 17 lbs.
STC: Safety cable.
SW45: 45º hang straight swivel.
Model# Mounting Light source selection
Voltage
Finish
TCB:
3ft. extended black spiral
power cord.
SR400
SR410
SR420
ACA3
ACW3
APA
APC
APS
S
T
W
MMHH(E(EDD1177) )
M50
M70
M100
M150
M175
HPS (ED17)
H50
H70
H100
H150
CF (Gx24q)
Single lamp
F132
F142
F157
CF (Gx24q)
Two lamp
F226
F232
F242
120 V Standard factory (Refer to color chart)
prewired (If no voltage
is specified)
For other voltages,
Standard selection
WHT:Snow white
please specify with
BKT: Jet black
catalog number.
BZT: Bronze
H.I.D.
GRT: Titanium gray
208 V Note:
240 V
50W.HPS
is available
277 V with
347 V ^120/277V
only.
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
Compact fluorescent
smart ballast 120/277
CS: Custom color
RAL: RAL# color
347 V (To specify)
PC5:
EM42S:
FS:
PH1:
PH2:
QS:
QRS:
Accessories
High impact diffuser.
Max.50W
Electrical
1 lamp (26/32/42W)
Fuse
120/277V photo cell.
347V photo cell.
Standby lamp socket.
H.I.D. lamp restrike
Note: EM optional battery test
switch and pilot lamp are installed
remotely. (See pages 101/ 102)
PH1 & PH2 are installed with
luminaire when specified with
C.F.L. sources.
For H.I.D sources PH1 or PH2
are installed with pole only. (see
(Lamps by others)
options APA/APS/ACA3/APC)
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 92
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007