SR360 Datasheet, PDF (1/4 Pages) Vanlong Technology Co., Ltd. – 360.00 MHz One-Port SAW Resonator

Luminous
opening
Type:
QUANTITY:
Project:
Catalog
number:
SR360
Fixture
Wattage
Voltage
SR360 SERIES
SCIROCCO - HID/CFL
Finish
ELECTRICAL ELECTRICAL MOUNTING
Option
Option
Option
ACCESSORIES
Option
SR360T
1- Cast aluminum ballast housing.
1
2- Universal ballast tray with twist lock
design.
3- Sealed and isolated lamp compartment.
2
4- Housing/shade assembly hinge
mechanism.
3
5- Borosilicate prismatic heavy glass
diffuser.
6- Set of cast aluminum louver rings.
4
7- Structurally reinforced perimeter
5
aluminum shade. Inner surface is
6
standard white enamel for increased
light performance.
7
17.25”
(438)
20”
(508)
EPA: 0.75
MATERIALS
Scirocco is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%. The top cast aluminum housing is designed with a
hinged mechanism.
The hard aluminum shade assembly is designed with a set of perimeter
reinforcement ribs. The inner surface is standard white enamel for higher light
efficiency.
The lower optical assembly includes sealed borosilicate prismatic glass diffuser,
secured with a silicone memory retention gasket.
The diffuser is enclosed in a star ribbed one piece cast aluminum cage.
ELECTRICAL
High Intensity Discharge (H.I.D)
BALLAST Electronic 120/277V multi volt, or 347V (50-60HZ) with a
minimum starting temperature of -30ºC/-20ºF, including end of life
protection.
SOCKET
Medium base pulse rated 4KV porcelain body with a nickel plated
screw shell, and center contact rated 600V. Supplied with 200°C
leads.
Compact Fluorescent (CFL)
BALLAST 120/277V-50/60HZ multi volt or 347V electronic ballast with end of
life protection. Minimum starting temperature of 0ºF/-18ºC
SOCKET Thermoplastic body rated for 75W-600V. Supplied with 105°C leads.
Finish
Five-stage preparation process including preheating of cast aluminum parts for
air extraction, and an environmentally friendly alloy sealant. Polyester powder
coating is applied through an electrostatic process and oven cured for long
term finish.
Mounting
Maximum weight: 18lbs (8.2kg)
Scirocco is designed as a modular luminaire concept offering a selection of
mounting arrangements for various architectural requirements.
Pole, wall or suspended attachments are proposed with high quality components
to meet multiple installation conditions.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
CE certification on request.
Rated IP65.
Access
to lamp
and ballast
Scirocco is designed
for ease of access
to electrical and
lighting compartment
with a unique hinge
mechanism concept.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1