SR300 Datasheet, PDF (1/4 Pages) Electronic devices inc. – FAST RECOVERY,100ns. HIGH VOLTAGE 25ma,MINIATURE SILICON RECTIFIERS

L UMINIS
Specification
SCIROCCO
SR300 . SR300C
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content. #356 alloy.)
1
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
- One-piece molded silicone gasket with memory retention.
2
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1- Cast aluminum ballast housing, with built-in hinge mechanism.
2- Set of two cast aluminum clamp retainers.
3- Thermal shock and heat resistant borosilicate frosted
heavy glass diffuser, with a prismatic linear inner glass structure.
4- One piece cast aluminum star ribbed cage
3
4
Photometry
7 1/2”
Note:
SR300 series is modular
luminaire offered with an
array of standard or
18”
optional attachments, to
16” meet multiple installation
requirements. Please
specify desired mounting _SR300C
accessory with model _{Ceiling surface}
number.
mount
(See pages 101/ 102)
Max. 70W
90
60
30
Separate updated
technical specification
sheets with related models
and light sources with I.E.S
formatted photometry are
available on
www.luminis.com.
Certification
E.T.L Wet Location.
Weight & EPA
E.P.A: 0.5 sq./ft Max. weight: 15 lbs..
Model# Mounting Light source selection
Voltage
Finish
Except for
SR300C
SR300
SR300C
ACA3
ACW3
APA
APC
APS
S
T
W
(Lamps by others)
MH (ED17) CF (Gx24q)
M50
M70
M100*
M150*
M175*
Single lamp
F132
F142
F157
CF (Gx24q)
HPS (ED17)
H50
H70
H100**
H150**
Two lamp
F226
F232
F242
100W/150W & 175W H.I.D.
are available
with SR300 only.
120 V Standard factory
prewired (If no voltage
is specified)
For other voltages,
please specify with
catalog number.
H.I.D.
208 V
240 V
277 V
347 V
Compact fluorescent
smart ballast 120/277
347 V (To specify)
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
Please refer to pages 101 /102 &
103 for additional details.
Options
SPB:
SPW:
STM60:
STM80:
STC:
SW45:
TCB:
PC5:
EM42S:
FS:
PH1:
PH2:
QS:
QRS:
Mounting
3ft. black power cord
(3/18-300v with
suspension cable.
3ft. white power cord
(3/18-300v with
suspension cable.
60” lg.suspension stem.
80” lg.suspension stem.
Safety cable.
45º hang straight swivel.
3ft. extended black spiral
power cord.
Accessories
High impact diffuser.
Max.50W
Electrical
1 lamp (26/32/42W)
Fuse
120/277V photo cell.
347V photo cell.
Standby lamp socket.
H.I.D. lamp restrike
Note: EM optional battery test
switch and pilot lamp are installed
remotely. (See pages 101/ 102)
PH1 & PH2 are installed with
luminaire when specified with
C.F.L. sources.
For H.I.D sources PH1 or PH2
are installed with pole only. (see
options APA/APS/ACA3/APC)
Not availeble with SR300C
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 89
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007