SR215 Datasheet, PDF (1/4 Pages) Lumins Inc. – Cast aluminum driver housing.

SR115 with
Luminous
opening
Type:
QUANTITY:
Project:
Catalog
number:
Fixture
Wattage
Voltage
SR115/SR215 SERIES
SCIROCCO - LED
Finish
ELECTRICAL ELECTRICAL MOUNTING
Option
Option
Option
ACCESSORIES
Option
SR115T
1- Cast aluminum driver housing.
2- Universal driver tray with twist lock design.
3- Sealed and isolated LED compartment.
1
4- Housing/shade assembly hinge mechanism.
5- Cast aluminum LED heat dissipator.
2
6- Borosilicate prismatic heavy glass diffuser.
7- Cast aluminum ribbed cage.
8- Structurally reinforced perimeter aluminum
3
shade. Inner surface is standard white
4
enamel for increased light performance.
5
SR215T
6
7
8
SR215: Full cutoff luminaire
MATERIALS
Scirocco is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%..
The top cast aluminum housing is designed with a hinged mechanism.
The hard aluminum shade assembly is designed with a set of perimeter
reinforcement ribs. The inner surface is standard white enamel for higher light
efficiency.
The lower optical assembly includes sealed borosilicate prismatic glass diffuser,
which is secured with a silicone memory retention gasket.
Electrical
LED
DRIVER 120/277V multi volt (50-60HZ) with a minimum starting

temperature of -30ºC/-22ºF. Optional 347V on request.

Output over voltage. Output over current and output short circuit

protection with auto-recovery.

Over temperature protection (110ºC).
LED

Standard 4000ºK LED platform included. Optional 3000ºK and
3500ºK available. Removable modular LED platform.
LIFE
51,000hrs L B (based on IESNA TM-21 Test Method and LM80 data).
77 50
68,000hrs L B (calculated projection from LM80 data).
70 50
Finish
Five-stage preparation process including preheating of cast aluminum parts for
air pocket extraction, and an environmentally friendly alloy sealant. Polyester
powder coating is applied through an electrostatic process and oven cured for
long term finish.
MOUNTING
Maximum weight: 14.66lbs (6.7kg)
Scirocco is designed as a modular luminaire concept offering a selection of
mounting arrangements for various architectural requirements.
Pole, wall or suspended attachments are proposed with high quality components
to meet multiple installation conditions.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
Photometry tested per IES LM-79-08 / IES LM80 test report at 25º C.
Rated IP65.
19”
(482)
20” (508)
SR115
EPA: 0.75
SR215
Access
to driver
Access to
LED source
Scirocco is designed for ease of access with a double hinge sealed
mechanism isolating the light chamber from the driver compartment
minimizing maintenance handling and possibly damaging components.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1