SR150 Datasheet, PDF (1/4 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SCHOTTKY BARRIER RECTIFIER

L U MINIS
Specification
SCIROCCO
SR150
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content. #356 alloy.)
1
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
2
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1- Cast aluminum ballast housing, with built-in hinge mechanism.
3
2- Cast aluminum stainless steel spring loaded latch.
Release latch may be locked for restricted access
3- Hard aluminum triple shade assembly for brightness control.
4- Thermal shock and heat resistant borosilicate frosted
heavy glass diffuser, with a prismatic linear inner glass structure.
5- One piece cast aluminum star ribbed cage
4
Photometry
5
7 1/2”
18”
Certification
E.T.L Wet location
Model# Mounting
SR150
ACA3
ACW3
APA
APC
APS
S
T
W
Note:
90
SR150 series is a modular
luminaire offered with an
60
Please refer to pages 101 /102 &
array of standard or optional
103 for additional details.
15” attachments, to meet multiple
30
Options
installation requirements.
Separate updated
Please specify desired
technical specification
Mounting
mounting accessory with
model number.
sheets with related models
and light sources with I.E.S
formatted photometry are
SPB:
3ft. black power cord
(3/18-300v with
suspension cable.
(See pages 101/ 102)
available on
www.luminis.com.
SPW: 3ft. white power cord
(3/18-300v with
suspension cable.
STM60: 60” lg.suspension stem.
Weight & EPA
STM80: 80” lg.suspension stem.
E.P.A: 1.15 sq./ft Max. weight: 16 lbs.
STC: Safety cable.
SW45: 45º hang straight swivel.
Light source selection
Voltage
Finish
TCB:
3ft. extended black spiral
power cord.
MH (ED17)
M50
M70
M100
M150
M175
CF (Gx24q)
Single lamp
F132
F142
F157
120 V Standard factory
prewired (If no voltage
is specified)
For other voltages,
please specify with
catalog number.
H.I.D.
208 V
240 V
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
PC5:
EM42S:
FS:
PH1:
PH2:
QS:
QRS:
Accessories
High impact diffuser.
Max.50W
Electrical
1 lamp (26/32/42W)
Fuse
120/277V photo cell.
347V photo cell.
Standby lamp socket.
H.I.D. lamp restrike
HPS (ED17)
H50
CF (Gx24q)
Two lamp
277 V
347 V
GNT: Forest green
Optional colors
Note: EM optional battery test
switch and pilot lamp are installed
remotely. (See page 72)
H70
H100
H150
F226
F232
F242
Compact fluorescent
smart ballast 120/277
CS: Custom color
RAL: RAL# color
PH1 & PH2 are installed with
luminaire when specified with
C.F.L. sources.
347 V (To specify)
For H.I.D sources PH1 or PH2
are installed with pole only. (see
(Lamps by others)
options APA/APS/ACA3/APC)
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 87
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007