SR135 Datasheet, PDF (1/5 Pages) Lumins Inc. – Cast aluminum driver housing.

Type:
QUANTITY:
Project:
Catalog
number:
SR135
Fixture
Wattage
Voltage
SR135 SERIES
SCIROCCO - LED
Finish
ELECTRICAL ELECTRICAL MOUNTING
Option
Option
Option
ACCESSORIES
Option
SR135T
1- Cast aluminum driver housing.
2- Universal driver tray with twist lock design.
1
3- Sealed and isolated LED compartment.
4- Housing/shade assembly hinge mechanism.
2
5- Sealed cast aluminum LED heat dissipator.
6- Cast aluminum shade.
7- Cast aluminum lens frame with hinge
3
mechanism.
8- Clear tempered lens.
4
5
16.5”
6
(424)
7
8
Full cutoff luminaire
18”
(457)
EPA: 0.68
Materials
Scirocco is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%.
LED printed circuit board is assembled with a thick pad housing chamber
designed with a heat sink pattern to optimize heat dissipation and luminaire
efficacy. The driver is enclosed in a separate cast aluminum chamber accessible
with a separate hinge mechanism allowing a quick access for electrical
maintenance without disturbing the optical light chamber.
Electrical
LED
POWER SUPPLY
120/277V multi volt, or 347-480V (50-60HZ) with a minimum
operating temperature of -40ºC/-40ºF.
LED
Type II-III-IV or VS light distribution with high performance
optical lenses. Standard 4000ºK LED. LED system is available
with two intensity levels.
LIFE
80,000hrs (model L21W48) and 150,000hrs (model L42W60) L B based on
70 50
LM80 report for lumen maintenance.
Finish
Five-stage preparation process including preheating of cast aluminum parts for
air pocket extraction, and an environmentally friendly alloy sealant. Polyester
powder coating is applied through an electrostatic process and oven cured for
long term finish.
MOUNTING
Maximum weight: 31lbs (14.1kg)
Scirocco is designed as a modular luminaire concept offering a selection of
mounting arrangements for various architectural requirements.
Pole, wall or suspended attachments are proposed with high quality components
to meet multiple installation conditions.
Certification
Tested to UL1598 and CSA22.2 #250. ETL listed for wet location.
Photometric testing performed by an independent laboratory in accordance with
IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA
LM80 standards.
Rated IP65.
Access to
LED platform
Access
to driver
Scirocco is designed for ease of access with a double hinge sealed
mechanism isolating the light chamber from the driver compartment
minimizing maintenance handling and possibly damaging components.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1