SR105 Datasheet, PDF (1/4 Pages) Micro Commercial Components – 1 Amp Schottky Barrier Rectifier 50 - 100 Volts

SR105 with
Luminous
opening
Type:
QUANTITY:
Project:
Catalog
number:
Fixture
Wattage
Voltage
SR105/SR205 SERIES
SCIROCCO - HID/CFL
Finish
ELECTRICAL ELECTRICAL MOUNTING
Option
Option
Option
ACCESSORIES
Option
SR205: Full cutoff luminaire
SR105T
1- Cast aluminum ballast housing.
2- Universal ballast tray with twist lock design.
1
3- Sealed and isolated lamp compartment.
4- Housing/shade assembly hinge mechanism.
2
5- Borosilicate prismatic heavy glass diffuser.
6- Cast aluminum ribbed cage.
7- Structurally reinforced perimeter aluminum
3
shade. Inner surface is standard white
enamel for increased light performance.
4
5
SR205T
6
SR105
SR205
7
17.25”
(438)
EPA: 0.70
20”
(508)
MATERIALS
Scirocco is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%.
The top cast aluminum housing is designed with a hinged mechanism.
The hard aluminum shade assembly is designed with a set of perimeter
reinforcement ribs.
The inner surface is standard white enamel for higher light efficiency.
The lower optical assembly includes a sealed borosilicate prismatic glass
diffuser, secured with a silicone memory retention gasket.
The diffuser is enclosed in a star ribbed one piece cast aluminum cage.
ELECTRICAL
High Intensity Discharge (H.I.D)
BALLAST Electronic 120/277V multi volt, or 347V (50-60HZ) with a
minimum starting temperature of -30ºC/-20ºF, including end of life
protection.
SOCKET
Medium base pulse rated 4KV porcelain body with a nickel plated
screw shell, and center contact rated 600V. Supplied with 200°C
leads.
Compact Fluorescent (CFL)
BALLAST 120/277V-50/60HZ multi volt or 347V electronic ballast with end of
life protection. Minimum starting temperature of 0ºF/-18ºC.
SOCKET Thermoplastic body rated for 75W-600V. Supplied with 105°C leads.
Finish
Five-stage preparation process including preheating of cast aluminum parts for
air extraction, and an environmentally friendly alloy sealant. Polyester powder
coating is applied through an electrostatic process and oven cured for long
term finish.
Mounting
Maximum weight: 13.6lbs (6.2kg)
Scirocco is designed as a modular luminaire concept offering a selection of
mounting arrangements for various architectural requirements.
Pole, wall or suspended attachments are proposed with high quality components
to meet multiple installation conditions.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. CE certification on
request.
Rated IP65.
Access
to lamp
and ballast
Scirocco is designed
for ease of access
to electrical and
lighting compartment
with a unique hinge
mechanism concept.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1