SO15P Datasheet, PDF (1/1 Pages) Lumins Inc. – Direct/indirect twin pole mount

L UMINIS
18”
SO15P8 (8ft)
SO15P10 (10ft)
SO15P12 (12ft)
10º inclination
24”
13”
1
Standard white on
both faces
2
3
4 ^Optional
5 _SO15P-UP
Indirect light only
6 _Example:
7 SO15P10-UP-M100
8
9
Standard
10 _SO15P
50% up light
50% down light
._{Example :}
SO15P10-M100
11
12
Direct/indirect twin pole mount _SOLIS
Specification
SO15P
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with a 5 baths
preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated medium base porcelain socket.
- 75W/600V thermoplastic compact fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1 - 36” dia. x 1/4” thick aluminum disc reflector.
Reflector is standard textured white on both faces. Optional non
reflective face painted same color as the luminaire suffix -RD
2 - Reinforcing stabilizer bars.
3 - 1” dia.solid aluminum twin rods reflector support.
4 - Cast aluminum sealed top cover ,
with clear tempered flush mount lens.
5 - 8” dia. cast aluminum housing.
6 - Cast aluminum sealed removable glass lens frame, with perimeter
memory retention embedded silicone gasket.
7 - Tempered clear glass lens with minute prisms for light uniformity.
8 - Semi-specular aluminum reflector.
9 - 2” x 2” extruded square aluminum twin bollard stands.
10 - One piece heavy cast aluminum triangular bollard base.
11 - Aluminum flush mount sealed access cover plate with socket flat
head stainless steel screws.
12 - Set of four 3/4” -10 x 18” lg. galvanized anchor bolts.
36”
8”
6”
2” power
feed hole
Photometry
5”
3-7/8”
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 ^{www.luminis.com.}
60
Certification
UL. Wet Location.
Model#
SO15P8
SO15P10
SO15P12
Mounting
30
Set of four 3/4”-10 x 18” lg. galvanized anchor bolts.
Light source selection
Voltage
Finish
MH (ED17)
M50
M70
M100
M150
M175
MH (G12) T6
M39T
M70T
M150T
HPS (ED17)
H50
H70
H100
H150
(Lamps by others)
120 V Standard factory
prewired
(If no voltage is specified)
(Refer to color chart)
Standard selection
For other voltages, please
WHT:Snow white
specify with catalog number. BKT: Jet black
H.I.D.
BZT: Bronze
GRT: Titanium gray
208 V
DGT: Gun metal
240 V
CHT: Champagne
277 V
MST: Matte silver
347 V
GNT: Forest green
Note: 50W.HPS
is available with
120/277V only.
Optional colors
CS: Custom color
RAL: RAL# color
For options details and
specifications, please refer
to pages 72 &128
Options
RD::
UP::
FS:
Accessories
Alternate top face
disc color same as
luminaire.
Up light only.
Electrical
Fuse
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 ^{Toll free: 888 .401 .6999}
Page 107
Web: www.luminis.com
Sept. 2006 Rev.#2 Feb.2008