SO10B Datasheet, PDF (1/1 Pages) Lumins Inc. – Bollard

L UMINIS
.
1
2
3
4
5
6
7
10º inclination
24”
8
9
Bollard
Specification
SOLIS
SO10B
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with a 5 baths
preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated medium base porcelain socket.
- 75W/600V thermoplastic compact fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1 - Cast aluminum sealed top cover.
2 - 8” dia. cast aluminum housing.
3 - Specular aluminum reflector.
4 - Cast aluminum sealed removable glass lens frame, with perimeter
memory retention embedded silicone gasket.
5 - Tempered clear glass lens with minute prisms
for light uniformity.
6 - 2” x 2” extruded square aluminum twin bollard stands.
7 - One piece heavy cast aluminum triangular bollard base.
8 - Aluminum flush mount sealed access cover plate with socket flat
head stainless steel screws.
9 - Set of four 1/2” -13 x 12” lg. galvanized anchor bolts.
13”
8”
42”
6”
2” power
feed hole
5”
Photometry
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 www.luminis.com.
3-7/8”
60
Certification
Mounting
30
UL. Wet Location. Set of four 1/2” -13 x 18” lg. galvanized anchor bolts.
Model#
Light source selection
SO10B
MH (ED17)
M50
M70
HPS (ED17)
H50
H70
MH (G12) T6
M39T
M70T
CF (Gx24q)
Single lamp
F126
F132
CF (Gx24q)
Two lamp
F213
F218
(Lamps by others)
Voltage
120 V Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
H.I.D.
208 V
240 V
Note: 50W.HPS
is available with
277 V 120/277V only.
347 V
COMP. FLUO.
Smart ballast 120/277
347 V (To specify)
Finish
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
For options details and
specifications, please refer
to pages 72 &128
Options
EM42:
FS:
Electrical
1 lamp (26/32/42W)
Integral Emergency
battery back up.
Fuse
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
Web: www.luminis.com
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
November 2007 Rev.: Feb.2008
Page 106