QT500 Datasheet, PDF (1/3 Pages) Lumins Inc. – Cast aluminum mounting plate.

QT500
QUANTA - LED
Type:
QUANTITY:
Project:
Catalog
number:
QT500
Fixture
Wattage
Voltage
Finish
LIGHT DISTRIBUETLEIOCNTRICAL ELECTRICAL MOUNTING
Option
Option
Option Option
QT500
1
1- Cast aluminum mounting plate.
2
2- Removable sealed cast aluminum end
cover, with embedded silicone one
3
piece molded gasket.
4
3- Driver sliding tray for ease of access
and maintenance.
5
4- One piece extruded aluminum housing.
5- LED heat dissipating plate.
6- LED optical light control.
6
7- Clear tempered sealed lens.
7
Full cutoff luminaire
Down light position
Down light position Up light position
MATERIALS
Quanta is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%. or 6063-T5 alloy for extruded parts.
LED light engine is assembled with a carefully engineered heat dissipating
chamber designed with a heat sink pattern to optimize luminaire efficacy. The
integral driver is assembled with a sliding plate allowing a quick access.
Quanta 500 series is standard with an R37 37º light beam reflector. A selection
of high performance alternate reflectors with various light distributions are
offered.
R17
17º light beam
R37
37º light beam
R60
60º light beam
FWT
Forward throw
ELECTRICAL
LED
DRIVER Standard 0-10V dimming ready. 120/277V multi volt (50-60HZ) with
operating temperatures of -30ºC/-22ºF to 60ºC/140ºF. Output over
voltage. Output over current and output short circuit protection with
auto-recovery.
LED
Standard 4000ºK LED platform included. Optional 3000ºK &
3500ºK. Removable modular LED platform.
LIFE
51,000hrs L B (based on IESNA TM-21 Test Method and LM-80 data).
77 50
68,000hrs L B (calculated projection from LM-80 data).
70 50
FINISH
Five-stage preparation process including preheating of cast aluminum parts for
air extraction, and an environmentally friendly alloy sealant. Polyester powder
coating is applied through an electrostatic process and oven cured for long
term finish.
MOUNTING
Maximum weight: 6.9lbs (3.2kg)
Quanta is designed for ease of access and installation.
The luminaire is designed for wall mount as an up or down light.
The mounting plate is designed to fit on a 4” (102) octagonal electrical box
using 3 1/2” (89) C/C mounting holes.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
Photometric testing performed by an independent laboratory in accordance
with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with
IESNA LM80 standards. CE certification on request.
Rated IP65.
4.5”
(114)
7.3125”
(186)
5.125”
(130)
7.75”
(197)
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1