PXD10 Datasheet, PDF (1/2 Pages) Lumins Inc. – 4” Dia.X 6” extruded aluminum step poles

L UM INIS
4” Dia.X 6” extruded aluminum step poles _POLES
Specification
PXD
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Cast aluminum wiring access cover.
- Set of 4 galvanized anchor bolts with 8 nuts and washers.
- 6061 T6 alloy 6” O.D. Extruded aluminum pole with a fine surface
of linear grooves to increase paint adherence and strength ,
with 4” O.D. x 125” thick aluminum center pole.
- One-piece 1/2” thick cast aluminum base plate with pole
collar adaptor and 4 reinforcing gussets.
- Two piece cast aluminum base cover.
- All stainless steel hardware.
PXD Pole (E.P.A)
PXD10 10 FT
PXD12 12 FT
PXD14 14 FT
PXD16 16 FT
6.8 5.2 4.1 3.3 2.8
5.2 3.8 2.9 2.3 1.9
3.1 2.2 1.5 1.2 1.0
2.2 1.3 1.1 0.8 N/A
4” O.D
6”
6” Dia.
Ft.
Mounting
60”
18”
4”
12”
Base plate is provided with a 3 3/4” dia. opening for power entry .
Galvanized anchor bolts :
Set of 3/4-10 x 18” lg. anchor bolts.
Model#
PXD : 4”X6” O.D. Extruded aluminum step base pole 1/8” wall.
Ft.
PXD10 10
PXD12 12
PXD14 14
Ft.
PXD16 16
PXD18 18
PXD20 20
For .226 wall thickness, add -2 suffix to catalog number.
9” Dia. Bolt circle.
11” Dia. base plate
Hand hole
wiring access cover
Street
side
Finish
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
For options details and
specifications, please refer
to page 144
Options
BNR:
BNR2:
BNF:
BNF80:
Accessories
Cast aluminum 2 piece
pole clamp assembly.
Fits with a 4” dia. O.D. pole.
Pair 2 cast aluminum 2
piece pole clamp assembly.
Fits with a 4” dia. O.D. pole.
One banner arm factory
preset in position.
Set of 2 banner arms factory
preset at 180º position.
FS:
PH1:
PH2:
GFI :
Electrical
Fuse
120/277V photo cell
347V photo cell
G.F.I . Ground fault
interruption receptacle.
luminaires may be altered for design improvements or discontinued without prior notice.
Note:
FS-PH1-PH2 Options are installed
with pole when specified with a Luminaire.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 143
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007