PR2270 Datasheet, PDF (1/3 Pages) Lumins Inc. – Standard heavy duty 45 hang straight swivel

PR2265/PR2270
PRISMA NOVA 22 - LED
Type:
QUANTITY:
Catalog
number:
Fixture
CCT
Project:
WATTAGE VOLTAGE
FINISH
Option Option Option
Ceiling pendant luminaire with a choice of frosted acrylic
PR2265
refractor or an anodized aluminum reflector with two part
inner surface treatment. Upper etched surface combined with
multi-faceted specular lower part.
1
Optional attachments and accessories are available to
customize and adapt each luminaire to particular design
2
requirements.
1- Standard heavy duty 45º hang straight swivel, with 5”
diameter (127) canopy and universal mounting plate.
2- 7/8” diameter (22) X36” long (914) suspension stem. Precut
3
factory stems are available on request. (Specify STM with
desired length)
3- Removable top cover for quick maintenance.
4- Extruded aluminum driver housing module with a fine linear
4
stria pattern.
5- LED heat sink specifically designed to optimize heat
PR2270
dissipation.
6- Set of four side struts secured in position with a cast
aluminum holder.
5
7- Struts holder ring. (Optional clear lens)
6
8- PR2265: Frosted acrylic refractor.
PR2270: Aluminum reflector.

Inner surface: multi-faceted specular anodized.

Exterior surface: Satin anodized natural aluminum.
8

Alternate exterior finish (Option RP8)
7
MATERIALS
Prisma is made of an extruded aluminum housing designed to optimize
the functionality of the driver and the solid state components.
Prisma is available with a choice of two interchangeable reflectors.
- Frosted acrylic refractor with a linear peripheral pattern providing
general upward illumination with efficient down lighting.
- Aluminum reflector designed to optimize light source performance
and uniformity.
Ventilated cast aluminum heat sink to optimize heat management and
luminaire efficacy.
LED array is mechanically secured and easily removable for maintenance
or upgrade.
ELECTRICAL
DRIVER Standard 0-10V dimming ready. 120/277V multi volt (50-

60HZ) with a minimum starting temperature of -30ºC/-22ºF.

Output over voltage, output over current and output short

circuit protection with auto-recovery.

Over temperature protection (110ºC).
LED
Standard 4000K or 5000K LED platform included. Optional

3000K and 3500K.

Standard 80 CRI (4000K), 70 CRI (5000K).
LIFE
63,000hrs L B (calculated projection from LM-80 data). (L1W120 and L1W85 -
70 50
71,000hrs and 84,000hrs respectively).
FINISH
Polyester powder coating is applied through an electrostatic process and oven
cured for long term finish.
MOUNTING
Maximum weight: 15.5lbs (7kg)
Mounts on a standard 4” (102) octagonal electrical box with 3 1/2” (89) C/C
mounting holes.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed damp location.
Photometric testing per LM79-2008, LED light source with LM80 certified
testing.
36”
(914)
PR2265
23.5” (597)
PR2270
23” (584)
24”
(610)
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
LUMINIS.COM
01