PR1240SOLO Datasheet, PDF (1/3 Pages) Lumins Inc. – Extruded aluminum ballast housing.

Type:
QUANTITY:
Project:
Catalog
number:
Fixture
Wattage
Voltage
Finish
PR1240/PR1241
PRISMA SOLO 12 - HID/CFL
Option
Option
Option Option
PR1240
1
Ceiling pendant luminaire with a choice
of clear acrylic refractor or an anodized
2
aluminum reflector with two part inner
surface treatment. Upper etched surface
combined with multi-faceted specular lower
part.
3
Optional attachments and accessories are
available to customize and adapt each
luminaire to particular design requirement.
1- Extruded aluminum ballast housing.
2- Cast aluminum removable top cover for
quick maintenance.
3- Standard heavy duty 45º hang straight
swivel with 7/8” Dia. (22) X 36” Lg. (914)
suspension stem. Precut factory stems
4
are available on request. (Specify STM
PR1241
with desired length)
4- 1 1/2” (38) diameter lamp holder tubing.
5- PR1240: Clear acrylic refractor.
5
PR1241: Aluminum reflector.
Inner surface: High performance
multi-faceted specular
anodized.
Exterior surface: Satin anodized
natural aluminum.
Alternate exterior finish
(Option RP6)
MATERIALS
Prisma is made of an extruded aluminum ballast housing designed to optimize
functionality of electrical components.
Prisma is available with a choice of two interchangeable reflectors.
- A clear acrylic refractor with a linear peripheral pattern providing general
upward illumination with efficient down lighting.
- An aluminum reflector designed to optimize light source performance and
uniformity.
ELECTRICAL
Metal Halide
BALLAST Electronic 120/277V multi volt or 347V (50-60HZ) with a minimum
starting temperature of -22°F/-30°C including end of life protection.
SOCKET
Medium base pulse rated 4kV porcelain body with a nickel plated
screw shell and center contact rated 600V.
Supplied with 200°C leads.
Compact Fluorescent (CFL)
BALLAST Electronic 120/277V multi volt, or 347V (50-60HZ) with end of life
protection. Minimum starting temperature of 0ºF/-18ºC.
SOCKET Thermoplastic body rated for 75W-600V. Supplied with 105ºC leads.
Finish
Polyester powder coating is applied through an electrostatic process and oven
cured for long term finish.
Mounting
Maximum weight: 7lbs (3.2kg)
Mounts on a standard 4” (102) octagonal electrical box with 3 1/2” (89) C/C
mounting holes.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed damp location.
CE certification on request.
Rated IP41.
36”
(914)
7”
(178)
12”
(305)
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1