PL30P Datasheet, PDF (1/2 Pages) Lumins Inc. – Pole mount

L UM INIS
Please refer to page 145
for listing of matching poles
40”
Twin mount
Add suffix - 290
(EPA: 1.28 )
Please refer to page 79
for matching poles listing
Pole mount
Specification
PELICAN
PL30P
All exposed cast aluminum components are made of non corrosive
1
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
2
Finish: All polyester powder baked coatings preceded with a
5 baths preparation process. Meets military grade
3
MIL-C781706 with a 2000 hours salt spray test.
- Multi faceted twin reflector assembly can tilt and slide along pole
side, to maximize desired performance on field.
A locking cast aluminum assembly is provided to secure adjusted
position of reflectors.
Multi faceted reflector panels are painted with a textured white
coating applied on both faces. The white enamel textured finish over
the reflective surface insures optimal lighting performance and
brightness control.
4
- Pulse rated porcelain socket.
5
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast, installed on a tray with a quick
disconnect assembly.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1 - Isolated and sealed extruded aluminum ballast housing
15”
2 - Specular aluminum reflector.
3 - Cast aluminum luminaire housing with heat dissipation fins.
4 - Cast aluminum sealed removable glass frame, with perimeter
memory retention embedded silicone gasket.
7”
5 - Tempered clear glass lens .
Triple mount
42”
Add suffix - 320
(EPA: 2.09)
18”
6” x 6”
extruded aluminum ballast housing
Certification
UL. Wet Location.
Mounting / EPA
Max. weight: 30 lbs EPA: .091
Installation:
Please refer to page 147
for listing of matching poles
Photometry
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 ^{www.luminis.com.}
60
30
Model#
PL30P
Light source selection
MH (ED17)
M70
M100
M150
M175
* M250 (ED18) Mog. base
HPS (ED17)
H70
H100
H150
* H250 (ED18) Mog. base
(Lamps by others)
Voltage
120 V Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
H.I.D.
208 V
240 V
277 V
347 V
480 V
* Lamp operation requires
M250 ANSI code M58
H250 ANSI code S50
Finish
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
FS:
PH1:
PH2:
QS:
QRS:
Options
Electrical
Fuse
120/277V photo cell
347V photo cell
Quartz lamp socket
for external emergency
power.
Quartz restrike
standby relay.
Luminaires may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 77
Web: www.luminis.com
Sept. 2006 Rev: Jan.2008