PL25W Datasheet, PDF (1/2 Pages) Lumins Inc. – Wall mount

L UMIN IS
PL25W-UP
Up light luminaire
Wall mount
PELICAN
Specification
PL25W . PL25W-UP
1
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
2
Finish: All polyester powder baked coatings preceded with a
3
5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Multi faceted twin reflector assembly can tilt and slide along pole
side, to maximize desired performance on field.
A locking cast aluminum assembly is provided to secure adjusted
position of reflectors.
4
Multi faceted reflector panels are painted with a textured white
coating applied on both faces. The white enamel textured finish over
the reflective surface insures optimal lighting performance and
brightness control.
- Pulse rated porcelain socket.
- One-piece molded silicone gasket with memory retention.
5
- High power factor CWA ballast, installed on a tray with a quick
disconnect assembly.
6
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
15”
1 - 11 ga. galvanized pressure mounting plate.
2 - Isolated and sealed extruded aluminum ballast housing.
3 - Cat aluminum luminaire housing with heat dissipation fins.
4 - Specular aluminum reflector.
5 - Cast aluminum sealed removable glass frame.
7”
6 - Tempered clear glass lens.
PL25W:
PL25W-UP:
Wall down light luminaire
Wall up light Luminaire.
Mounting
2 5/16”
4 5/16”
Certification
UL. Wet Location.
18”
6” x 6”
extruded aluminum ballast housing
Mounting
Max. weight: 30 lbs
Installation: Connects to a standard 4” electrical
box with 3 1/2” c/c mounting holes.
(by others ) additional separate mounting
holes are provided with wall plate
Photometry
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 ^{www.luminis.com.}
60
30
Please refer to pages 72-79 for
additional details.
Model#
Light source selection
Voltage
Finish
Options
MH (ED17)
CF (Gx24q)
PL25W
PL25W-UP
M50
Single lamp
M70
F132
M100
F142
M150
F157
M175
F170
* M250 (ED18) Mog. base
HPS (ED17)
CF (Gx24q)
H50
H70
H100
H150
Two lamps
F232
F242
F257
*H250 (ED18) Mog. base
120 V Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
H.I.D.
208 V
240 V
277 V
347 V
480 V
* Lamp operation requires
M250 ANSI code M58
H250 ANSI code S50
(Lamps by others)
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
FS:
PH1:
PH2:
QS:
QRS:
Electrical
Fuse
120/277V photo cell
347V photo cell
Quartz lamp socket
for external emergency
power.
Quartz restrike
standby relay.
Luminaires may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 76
Web: www.luminis.com
Sept. 2006 Rev: Feb.2007