PL10P Datasheet, PDF (1/2 Pages) Lumins Inc. – Post top twin mount

L UM INIS
82”
15 3/4”
Post top twin mount
Specification
PELICAN
PL10P
1
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
2
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with a
5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
3
- Multi faceted twin reflector assembly can tilt and slide along pole
4
side, to maximize desired performance on field.
A locking cast aluminum assembly is provided to secure adjusted
5
position of reflectors.
Multi faceted reflector panels are painted with a textured white
6
coating applied on both faces. The white enamel textured finish over
7
the reflective surface insures optimal lighting performance and
brightness control.
8
- Pulse rated porcelain socket.
9
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast.
10
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1 - Aluminum reflector sliding assembly.
2 - Cast aluminum tilting and locking assembly.
24”
3 - Multi facet textured white aluminum reflector panels assembly.
4 - Cast aluminum curved reflector joiner arms.
5 - Tempered clear glass lens.
6 - Cast aluminum sealed removable glass frame, with perimeter
memory retention embedded silicone gasket.
36”
7 - Cat aluminum luminaire housing with heat dissipation fins.
8 - Specular aluminum reflector.
9 - Isolated and sealed aluminum ballast housing.
10 - 11 ga. galvanized pressure mounting plate.
7”
40”
Up/down
Please refer to page 79
for matching poles listing
15”
Photometry
+ _{15 deg.}
-
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 www.luminis.com.
Certification
UL. Wet Location.
Mounting / EPA
EPA: 5.5
Fits with a 4” or 5” dia. pole..
60
30
Model#
PL10P
Light source selection
MH (ED17)
M70
M100
M150
M175
* M250 (ED18) Mog. base
HPS (ED17)
H70
H100
H150
* H250 (ED18) Mog. base
(Lamps by others)
Voltage
120 V Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
H.I.D.
208 V
240 V
277 V
347 V
480 V
* Lamp operation requires
M250 ANSI code M58
H250 ANSI code S50
Finish
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
OFF
FS:
PH1:
PH2:
QS:
QRS:
Options
Mounting
Bi-level luminaires
position. To be
specified.
Electrical
Fuse
120/277V photo cell
347V photo cell
Quartz lamp socket
for external emergency
power.
Quartz restrike
standby relay.
Luminaires may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 73
Web: www.luminis.com
Sept. 2006 Rev: Jan.2008