PAA4 Datasheet, PDF (1/2 Pages) Lumins Inc. – 4”& 5” Dia. aluminum poles

L UMINIS
4”& 5” Dia. aluminum poles _POLES
Specification
PAA4 . PAA5
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Cast aluminum wiring access cover.
- Set of 4 galvanized anchor bolts with 8 nuts and washers.
- 6061 T6 alloy 4” or 5” O.D. x .125” or .225” thick aluminum pole.
- One-piece 1/2” thick cast aluminum base plate with pole
collar adaptor and 4 reinforcing gussets.
- Two piece cast aluminum base cover.
- All stainless steel hardware.
Ft.
18”
11” Dia. base plate
9” Dia. Bolt circle.
12 1/2”
4”
Street
Hand hole ^side
wiring
access cover
Mounting
Base plate is provided with a 3 3/4” dia. opening for power entry .
Galvanized anchor bolts :
Set of 3/4-10 x 18” lg. anchor bolts.
Model#
PAA4 : 4” O.D.
Aluminum pole
(E.P.A)
PAA410 10 FT .125 7.7 5.8 4.4 3.2 2.1
PAA410 -2
.226 20.5 15.8 12.5 10.0 5.1
PAA412 12 FT .125 7.6 5.6 4.2 3.1 1.2
PAA412 -2
.226 16.4 12.5 9.8 7.7 3.7
PAA414 14 FT .125 6.3 4.5 3.3 2.3 0.8
PAA414 -2
.226 13.8 10.4 8.1 6.3 3.0
PAA416 16 FT .125 4.5 2.9 1.8 1.0 -
PAA416 -2
.226 11.0 8.1 6.0 4.5 1.9
PAA418 18 FT .125 3.2 1.9 0.9 0.2 -
PAA418 -2
.226 9.0 6.4 4.6 3.2 1.1
PAA420 20 FT .125 2.1 0.9 - - -
PAA420 -2
.226 7.1 4.9 3.3 2.1 0.4
PAA5 : 5” O.D. Aluminum pole (E.P.A)
PAA510 10 FT .125 13.5 10.4 8.0 6.8 4.1
PAA510 -2
.226 33.4 26.0 20.7 17.2 9.0
PAA512 12 FT .125 10.6 7.9 5.9 5.0 3.0
PAA512 -2
.226 27.1 20.9 16.4 13.6 7.1
PAA514 14 FT .125 10.2 7.4 5.4 4.5 2.1
PAA514 -2
.226 22.4 17.1 13.2 11.0 5.6
PAA516 16 FT .125 8.1 5.6 3.9 3.3 1.4
PAA516 -2
.226 18.7 14.1 10.7 8.9 4.4
PAA518 18 FT .125 6.2 4.0 2.5 2.1 0.7
PAA518 -2
.226 15.5 11.4 8.5 7.1 3.4
PAA520 20 FT .125 4.5 2.6 1.2 1.1 -
PAA520 -2
.226 12.7 9.1 6.5 5.5 2.5
For options details and specifications, please refer to page 144
Finish
Options
PAA4. : 4” O.D. Aluminum pole 1/8” wall
PAA410 10 FT
PAA412 12 FT
PAA416
PAA418
16 FT
18 FT
PAA414 14 FT
PAA420 20 FT
PAA5. : 5” O.D. Aluminum pole 1/8” wall
PAA510
PAA512
PAA514
10 FT
12 FT
14 FT
PAA516
PAA518
PAA520
16 FT
18 FT
20 FT
For .226 wall thickness,
add -2 suffix
to catalog number.
For .375 wall thickness,
please consult factory.
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
BNR:
BNR2:
BNF:
BNF80:
Accessories
Cast aluminum 2 piece
pole clamp assembly.
Fits with a 4” dia. O.D. pole.
Pair 2 cast aluminum 2
piece pole clamp assembly.
Fits with a 4” dia. O.D. pole.
One banner arm factory
preset in position.
Set of 2 banner arms factory
preset at 180º position.
Electrical
FS:
Fuse
PH1: 120/277V photo cell
PH2: 347V photo cell
GFI : G.F.I . Ground fault
Note:
interruption receptacle.
FS-PH1-PH2
Options are installed with pole
when specified with a Luminaire.
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 ^{Toll free: 888 .401 .6999}
Page 140
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007