NT800 Datasheet, PDF (1/2 Pages) Lumins Inc. – Wall mount

L UMINIS
1
3
2
4
17 1/2”
Wall mount
NAUTILUX
Specification _{NT800 . NT805 . NT810 . NT825}
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated medium base porcelain socket.
- 75W/600V thermoplastic compact fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1- One piece cast aluminum luminaire housing.
2- Semi-specular aluminum reflector.
3- Heavy glass frosted diffuser.
4- Selection of cast aluminum modular lens guards.
NT800 : Single cross guard blades with cast aluminum lens trim.
NT805 : Quad cross guard blades with cast aluminum lens trim.
NT810 : Triple horizontal guard blades with cast aluminum lens trim.
NT825 : Plain glass lens diffuser with cast aluminum lens trim.
Rotation on site
14”
Photometry
NT800
NT805
NT825
NT810
12 1/4”
5 1/4”
6 3/4”
For ceiling mount.
refer to Option -C2 _{C.F.L. only}
Max. 2x32W
Cross view
Plane view
90
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
www.luminis.com.
60
30
Certification
Mounting
UL. Wet Location.
Max. Max. weight: 21 lbs. Installation: Mounts over a standard
4” octagonal electrical box with 3 1/2” c/c mounting holes.
For options details and specifications,
please refer to page 72
Model#
Light source selection
Voltage
Finish
Options
NT800
NT805
NT810
NT825
MH (ED17)
M50
M70
M100
HPS (ED17)
H50
H70
H100
INC. (A19)
A100
(Lamps by others)
CF (Gx24q)
Single lamp
F126
F132
F142
F157
F170
CF (Gx24q)
Two lamps
F218
F226
F232
F242
F257
120 V Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
H.I.D.
208 V
240 V
277 V
347 V
Note: 50W.HPS
is available with
120/277V only.
COMP. FLUO.
Smart ballast 120/277
347 V (To specify)
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
C2:
PC6:
EM42S:
FS:
PH1:
PH2:
QRS:
QS:
Accessories
Ceiling surface mount.
Maximum wattage
2x32W compact
fluorescent only.
High impact acrylic lens
diffuser. (max.50W)
Electrical
1 lamp (26/32/42W)
EM battery.
Fuse
120V photo cell
208/277V photo cell
Quartz restrike standby
relay.
Quartz lamp socket
for external emergency
power.
Note: EM optional battery
test switch and pilot lamp are
remotely installed.
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 69
Web: www.luminis.com
Sept. 2006 Rev. Feb.2008