NT625 Datasheet, PDF (1/2 Pages) Lumins Inc. – Cast aluminum enclosed ballast housing.

NT605/NT625/NT640 SERIES
NAUTILUX - LED
Type: ProvideQdUABNyTAITLYL: DATASPHrEojEeTc.tCS: EOPAMDRF(FC, RDHEA, EDTADSTAAHBEOETO,KP,DCFODMAPTOANSEHNEET, IC, CHIP, SEMICONDUCTO
Catalog
number:
NT605
Fixture
Wattage
Voltage
Finish
ELECTRICAL ELECTRICAL ELECTRICAL ACCESSORIES
Option
Option
Option Option
NT605
1
1- Cast aluminum enclosed ballast housing.
2- Silicone gasket with memory retention.
2
3- Cast aluminum louver front cover.
4- Heat dissipating fins with removable LED
3
platform.
4
5- Acrylic frosted inner lens.
6- Bright aluminum reflector.
5
All stainless steel hardware.
6
NT625
NT640
Materials
Nautilux is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%.
LED platform is easily removable and secured with a heat dissipating plate for
optimal light performance.
Wall mount: LED light engine is positioned to increase down lighting while
maintaining a general diffused uniform light.
Ceiling mount: NT625C-NT640C LED light engine is installed in down lighting
position to provide a general diffused light.
ELECTRICAL
LED
DRIVER Standard 0-10V dimming ready. 120/277V multi volt (50-60HZ) with a
minimum starting temperature of -30ºC/-22ºF.
Output over voltage, output over current and output short circuit
protection with auto-recovery. Over temperature protection (110ºC).
LED Standard 4000ºK LED platform included. Optional 3000ºK and
3500ºK. Removable modular LED platform.
LIFE
51,000hrs L B (based on IESNA TM-21 Test Method and LM-80 data).
77 50
68,000hrs L B (calculated projection from LM-80 data).
70 50
FINISH
Five-stage preparation process including preheating of cast aluminum parts for air
extraction, and an environmentally friendly alloy sealant. Polyester powder coating
is applied through an electrostatic process and oven cured for long term finish.
Mounting
Maximum weight: 5lbs (2.3kg)
Mounts on a standard 4” (102) octagonal electrical box with 3 1/2” (89) C/C
mounting holes.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
Photometry tested per IES LM-79-08 / IES LM80 test report.
CE certification on request.
Rated IP65.
2.5”
(63)
9.5”
(241)
NT640
Cast aluminum trim with
plain frosted diffuser
NT625
Cast aluminum
twin cross blades
NT605
Cast aluminum
front louver
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1