LX150PC Datasheet, PDF (1/2 Pages) Lumins Inc. – Post top mount

L U MINIS
Post top mount.
LUXOR
See note
1 ^{Specification}
LX150PC . LX150PH
See note
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
2 content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with
3
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
4 _{- Pulse rated medium base porcelain socket.}
- 75W/600V thermoplastic compact fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
5
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
6
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
7
- Cast aluminum swing out hinge mechanism for quick
maintenance access.
8
Note: LX150PH: H.I.D. Luminaires are
provided for a 5”O.D.side pole mount.
LX150PC: C.F.L. luminaires are side pole
direct mount. with a 4” or 5” O.D pole.
C.F.L ballast is installed in luminaire arm.
4” or 5” O.D
1 - H.I.D. Ballast assembly post top pull-out tray, for ease of access
and maintenance. C.F.L ballast is enclosed in luminaire arm.
(See note.)
2 - One piece copper free cast aluminum pyramid housing .
3 - Standard specular multi facet reflector,with type III
distribution for point sources.
4 - Stainless steel captive hexagonal cap screws .
5 - Cast aluminum sealed and hinged regressed glass frame,
with perimeter memory retention embedded silicone gasket.
6 - Clear tempered glass lens.
7 - Hinge frame slider allowing to keep the luminaire lens frame
in open position during maintenance.
8 - Standard 2” X 4” Extruded aluminum arm to accommodate C.F.L
electronic ballast.
5” O.D
8”
14”
20”
LX150PH
H.I.D.
LX150PC
C.F.L
Ballast
enclosed in
post top
Ballast
enclosed in
2” x 4”
extruded
arm.
Hinged lens
frame
Photometry
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 www.luminis.com.
60
Certification
Mounting
30
UL. Wet Location.
E.P.A.: 0.74
Installation:
Please refer to page 146 for compatible pole attachment.
Model#
Light source selection
Voltage
Finish
LX150PC
*LX150PH
LX150PH
MH (ED17)
M70
M100
M150
M175
HPS (ED17)
H70
H100
H150
LX150PC
CF (Gx24q)
Single lamp
F142
F157
F170
CF (Gx24q)
Two lamp
F226
F232
F242
(Lamps by others)
120 V Standard factory
(Refer to color chart)
prewired
(If no voltage is specified)
Standard selection
For other voltages, please
WHT:Snow white
specify with catalog number. BKT: Jet black
H.I.D.
BZT: Bronze
GRT: Titanium gray
208 V
DGT: Gun metal
240 V
CHT: Champagne
277 V
MST: Matte silver
347 V
GNT: Forest green
480 V
Optional colors
COMP. FLUO.
Smart ballast 120/277
CS: Custom color
RAL: RAL# color
347 V (To specify)
For options details and
specifications, please refer to
pages 42-54 &72.
Options
Accessories
RL5: Type V semi specular
reflector.
RL4: Forward Throw type
IV distribution.
RL4 is available with LX150PC &
LX150PH series single lamp only)
Electrical
FS:
Fuse
PH1: 120/277V photo cell
PH2: 347V photo cell
Note:
F226-F232-F242
Two C.F.L. lamps
are applicable with RL5
reflector only
* LX150PH Series require a 5” O.D. pole ( Please refer to page 146)
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 52
Web: www.luminis.com
Sept. 2006 Rev: Feb.2007