KR1503 Datasheet, PDF (1/4 Pages) Lumins Inc. – Ceiling mount

L UMINIS
Ceiling mount
KRONOS
Specification
KR1503 . KR1504
1
Ceiling pendant aluminum reflector, or acrylic frosted prismatic diffuser
for a soft light illumination. An array of optional attachments and
2
accessories are available to customize, and adapt each luminaire to
particular design scheme and lighting concept.
Finish: All polyester powder baked coatings preceded with
3
a 5 baths preparation process.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
4
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
5
1- Heavy duty hang straight swivel, with 4 1/2” dia. (115)
canopy and universal mounting plate.
2- 5/8” Dia.(16) X36” lg. (900) suspension stem.
Precut factory stems are available on request
(Specify option STM with desired length).
7
(Options STM60 & STM80 for longer stems.)
3- Cast aluminum removable top cover for quick maintenance.
4- Extruded aluminum ballast housing module with
a fine linear stria pattern.
5- Set of four cast aluminum styled lens holders.
6- Standard 1/4” (6mm) thick frosted acrylic lens with center opening
for direct access to relamping.
Center opening for direct relamping.
7- KR1503: Semi specular anodized aluminum reflector.
6
Alternate reflector finish (Option RP9)
KR1504: Frosted acrylic prismatic diffuser.
18”
(450)
36”
(900)
Photometry
Separate updated technical specification
sheets with related models and light
sources with I.E.S formatted photometry are
available on
www.luminis.com.
90
Options
15”
(380)
KR1503
KR1504
60
30
Certification
Mounting.
UL. Indoor use.
(CE certification on request)
Max. weight: 16 lbs (7.2).
Installation: Mounts over a standard 4”(100)
octagonal box with 3 1/2” (89) c/c mounting holes.
Model#
Light source selection
Voltage
Finish
CF (Gx24q)
KR1503
KR1504
Single lamp Two lamps
F132
F142
F157
F170
F185
2G8-1 Base
MH (ED17)
F226
F232
F242
F257
INC. (A19)
M50
A100
M70
M100
M150
Not available
M175 * with KR1504
120 V Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
H.I.D. (ED17)
120 V
277 V
347 V
COMP. FLUO.
Smart ballast 120/277
347 V (To specify)
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
Optional colors
CS: Custom color
RAL: RAL# color
* KR1503: M175 includes L18F
full clear lens enclosure for
enclosed rated lamp.
(Lamps: By others)
(Open rated lamps only.
Except for 175MH)
Refer to pages
16 .17 . 18 for details
on listed options.
STC:
STM60:
STM80:
STM:
SW45:
TCB:
TCW:
SPB:
SPW:
Mounting
Safety cable.
60”lg. (1525) Stem.
80”lg. (2030) Stem.
Cut to size stem.
36” lg. stem with 45º
hang straight swivel
Black spiral power cord.
White spiral power cord.
3/18 black straight power
cord with aircraft cable.
3/18 white straight power
cord with aircraft cable.
Accessories
CLA: Satin aluminum anodized
bottom cross louver.
LBL: Blue luminous edging lens.
L18F: L18F frosted acrylic full lens
enclosure.
RP9 : Inside reflector semi-
specular. Outside reflector
same as luminaire.
Electrical
Dimming & dual switch options:
Please refer to page 16
DM1:
DM2:
DM3:
DM4:
DS1:
EM42:
QRS:
QS:
1x26w / 1x32w / 1x42w
120V Dimming ballast.
2x26W 120V Dimming ballast.
2x32w / 2x42w
1X57 / 1X70W
120V Dimming ballast.
2x57/ 70w 120V Dimming
ballast.
Dual switch 1 lamp.
1 lamp (26/32/42W)
Integral Emergency
battery back up.
Quartz restrike standby relay.
Quartz lamp socket
for external emergency power.
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Toll free: 888 .401 .6999
Page 3
Web: www.luminis.com.
Sept. 2006 Rev.Feb.2007