L202-4080033C30000 Datasheet, PDF (4/14 Pages) Lumileds Lighting Company – Turnkey solution on a rigid substrate enabling high-efficacy designs

Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON XR-3535L at 300mA, T_j=25ºC ^[1].
Nominal
CCT
Minimum
CRI ^[2]
Luminous Flux ^[3] (lm)
Minimum
Typical
3000K
80
1320
1403
3500K
80
1386
1469
4000K
80
1419
1502
5000K
80
1419
Notes for Table 1:
1. Nominal current is 100mA x 3 parallel strings = 300 mA.
2. Lumileds maintains a tolerance of ±2 on CRI measurements.
3. Lumileds maintains a tolerance of ±7.5% on flux measurements.
4. “x” is an attribute used to designate connector brand/type. See Part Number Nomenclature.
1502
Typical Luminous
Efficacy (lm/W)
Part Number ^[4]
142
L202 - 3080033C3000x
148
L202 - 3580033C3000x
152
L202 - 4080033C3000x
152
L202 - 5080033C3000x
Electrical and Thermal Characteristics
Table 2. Electrical and thermal characteristics for LUXEON XR-3535L at 100mA, T_j=25ºC.
Part Number ^[6]
Forward Voltage (V_f) ^[1]
Minimum Typical MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage (mV/°C) ^[2]
L202 – xxxx033C3000x
31.9
33
34.1
–16.5
Notes for Table 2:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements for LUXEON 3535L LEDs.
2. Measured between 25°C and 85°C for coefficient of forward voltage.
3. Rθ_J-S specified from LED junction to temperature measurement point (T_s) next to LED. See Application Brief AB203 for details.
4. Rθ_S-B specified from temperature measurement point (T_s) next to LED, to bottom of PCB (heat sink).
5. Rθ_J-C specified from LED junction to T_C (thermal contact point) on top of PCB.
Typical Thermal Resistance
Junction to Solder Pad (°C/W) ^{[3, 4, 5]}
Rθ_S-B
0.61
Rθ_J-C
1.2
Rθ_J-S
0.55
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
3