MXM8-PW27-0000 Datasheet, PDF (3/27 Pages) Lumileds Lighting Company – LUXEON 3535 Mid-Power LEDs

General Information
Product Nomenclature
LUXEON Mid-Power Illumination emitters are tested and binned at 100 mA, with current pulse duration of 20 ms.All
characteristic charts where the thermal pad is kept at constant temperature (25ºC typically) are measured with current pulse
duration of 20 ms.
The part number designations for the MXM8 series is explained as follows:
MXMA-BCDE-IJKL
Where:
A—
designates minimum CRI performance (value 7 = 70 minimum and 8 = 80 minimum)
B — designates radiation pattern (value P = Lambertian)
C — designates color (value W = White)
D, E — designates nominal ANSI CCT (for example, 30 = 3000K and 40 = 4000K)
I, J, K & L— designates additional part numbers
Therefore products in this series with minimum CRI value of 80, CCT of 4000K will have the part numbering scheme:
M X M 8 - PW 4 0
Average Lumen Maintenance Characteristics
Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms ofthe percentage of initial light output
remaining after a specified period of time.
Environmental Compliance
Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market.LUXEON
Mid-Power LEDs are compliant to the European Union directives on the restriction of hazardous substances in electronic
equipment, namely REACH and the RoHS directive.Philips Lumileds will not intentionally add the following restricted materials
to these LEDs: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl
ethers (PBDE).
LUXEON 3535 Datasheet DS202 20130228 ©2013 Philips Lumileds Lighting Company.
2