L1Q0-278000000ZZZ0 Datasheet, PDF (3/18 Pages) Lumileds Lighting Company – Industry Standard 3535 Footprint Delivering High Efficacy at High Drive Current

General Information
Product Nomenclature
LUXEON Q emitters are specified and binned “hot” under conditions comparable to those found in “real-world” lighting
products. The test conditions for LUXEON Q are 350 mA DC with junction temperature at 85°C.
The part number designation is explained as follows:
L1Q0-xxyy00000zzz0
Where:
xx —
yy —
zzz —

designates nominal ANSI CCT (27 for 2700K, 30 for 3000K)
designates minimum CRI performance (70 for 70 CRI, 80 for 80 CRI)
designates minimum flux performance at standard binning current and temperature (090 for 90lm,
110 for 110lm, etc)
Therefore, 80 CRI products tested and binned at 3000K with a 100lm minimum flux at binning current and temperature will
have the part numbering scheme:
L1Q0-3080000001000
Therefore, 70 CRI products tested and binned at 5700K with a 120lm minimum flux at binning current and temperature will
have the following part numbering scheme:
L1Q0-5770000001200
Average Lumen Maintenance Characteristics
LUXEON Q products are tested in compliance with LM-80. Please visit www.philipslumileds.com/support/documentation/
lumen-maintenance or contact your local Philips Lumileds Technical Solutions Manager for TM-21 extrapolations or other
suppor t.
Environmental Compliance
Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Q
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS and REACH directives. Philips Lumileds will not intentionally add the following restricted material to the LUXEON Q:
lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
LUXEON Q Datasheet DS118 20140109 ©2014 Philips Lumileds Lighting Company.
2