DS55 Datasheet, PDF (2/9 Pages) Lumileds Lighting Company – Lead-Free SuperFlux LEDs

Outline Drawings
Lead Free SuperFlux LEDs Datasheet DS55 (10/06)
Selection Guide
Table 1
Device Type
LED Color
Total Flux Φ_V (LM)
@ 70 mA^[1]
Typ.
HPWA MH02 AS AlInGaP Red Orange
2.0
HPWA DH02
HPWT RD02
HPWT MD02
TS AlInGaP Red
3.8
HPWT DD02
HPWT BD02
HPWT RH02
HPWT MH02 TS AlInGaP Red Orange
5.0
HPWT DH02
HPWT BH02
HPWT RL02
HPWT ML02
TS AlInGaP Amber
2.5
HPWT DL02
HPWT BL02
Total Included
Angle θ_90V
(Degrees) ^[2]
Typ.
95
75
44 X 88
100
70
50
44 X 88
100
70
50
44 X 88
100
70
50
Notes:
1.Φv is the total luminous flux output as measured with
an integrating sphere after the device has stabilized.
(R_{θJ A} = 200°C/W, T_A = 25ºC)
2.θ_{0.90 V} is the included angle at which 90% of the total
luminous flux is captured.
Absolute Maximum Ratings at
T_A = 25ºC
Parameter
DC Forward Current ^[1]
Power Dissipation
Reverse Voltage (IR = 100 mA)
Operating Temperature Range
Storage Temperature Range
High Temperature Chamber
LED Junction Temperature
Solder Conditions ^[2]
Preheat Temperature
Solder Temperature
Table 2
HPWA HPWT
70
70
187
221
10
10
40 to +100
55 to +100
125ºC, 2 Hours
125ºC
Units
mA
mW
V
ºC
ºC
85 +/ 15°C, 70 sec +/ 20 sec
250 +/ 5°C, 2.5 +/ 0.5 sec
[1.5mm (0.06 in) below seating plane]
Notes:
1. De rate as shown in Figures 4a and 4b.
2. See "Recommended Soldering Conditions", Page 8.
2