DS45 Datasheet, PDF (2/17 Pages) Lumileds Lighting Company – power light source LUXEON® III Emitter

Mechanical Dimensions
Lambertian
Drawings not to scale
Notes:
1.The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is
required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug.
2.All dimensions are in millimeters.
3.All dimensions without tolerances are for reference only.
TOP VIEW
Side Emitting
BOTTOM VIEW
Drawings not to scale
Notes:
1.The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is
required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug.
2.Caution must be used in handling this device to avoid damage to the lens surfaces that will reduce optical efficiency.
3.All dimensions are in millimeters.
4.All dimensions without tolerances are for reference only.
LUXEON III Emitter DS45 (3/06)
2