DS09 Datasheet, PDF (2/5 Pages) Lumileds Lighting Company – SnapLED 70

Outline Drawings
Notes:
1. Dimensions are in millimeters (inches).
2. Dimensions without tolerances are
nominal.
3. Cathode lead is indicated with a
"C" and anode lead is indicated
with an "A."
4. Special characteristics are designated
with a triangle.
5. Clinch joint locations shown in dashed
lines on top view of part (11.50 mm
spacing).
Selection Guide
Part Number
LED Color
Total flux Φ_V (lm)
@ 70 mA^[1]
Min.
HPWT-TH00-00000 TS AlInGaP Red-Orange
3.0
HPWT-FH00-00000
HPWT-TL00-00000
TS AlInGaP Amber
1.5
HPWT-FL00-00000
Total Included
angle θ_{0.90 V}
(Degrees) ^[2]
Typ.
120
70
120
70
Notes:
1. Φ_V is the total luminous flux output as
measured with an integrating sphere
after the device has stabilized
(Rθ_j-a = 200°C/W, T_A = 25°C).
2. θ_{0.90 V} is the included angle at which 90%
of the total luminous flux is captured.
See Figure 5.
Absolute Maximum Ratings at T_A = 25°C
Parameter
DC Forward Current ^[1,2]
Power Dissipation
Reverse Voltage (I_R = 100 µ_A)
Operating Temperature Range
Storage Temperature Range
High Temperature Chamber
LED Junction Temperature
HPWT-Tx00/Fx00
70
221
10
-40 to +100
-55 to +100
125 (2 hrs.)
125
Units
mA
mW
V
°C
°C
°C
°C
Notes:
1. Operation at currents below 10 mA is
not recommended.
2. Derate linearly as shown in Figure 3.
SnapLED 70 Technical Data
2
Document #: DS09 (08/05)