DS08 Datasheet, PDF (2/8 Pages) Lumileds Lighting Company – SnapLED 150

Part Number
HPWS TH00
HPWS FH00
HPWS TH77
HPWS FH77
HPWS TL00
HPWS FL00
Drive Current
Single Mode
Single Mode
Dual Mode
Dual Mode
Single Mode
Single Mode
Selection Guide
Table 1
LED Color
TS AlInGaP Red Orange
Total
Flux Φ_V (lm)
@ 150 mA^[1]
Typ.
11.0
TS AlInGaP Amber
5.5
Total
Included Angle
θ_0.90V (Degrees) ^[2]
Typ.
120
70
120
70
120
70
Viewing Angle
2θ^1/2
(Degrees)
Typ.
85
30
85
30
85
30
Notes for Table 1:
1.Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized. (R_{θJ A} = 100°C/W,
T_A = 25ºC, T_j ~ 60°C.)
2.θ_{0.90 V} is the included angle at which 90% of the total luminous flux is captured. See Figure 5.
Outline Drawings
Notes:
1.Dimensions are in millimeters (inches).
2.Dimensions without tolerances are nominal.
3.Cathode lead is indicated with a "C" and anode lead is indicated with an "A."
4.Clinch joint locations shown in dashed lines on top view of part (11.50 mm spacing).
SnapLED 150 Technical Datasheet DS08 (01/07)
2
Copyright 2007 Philips Lumileds Lighting Company.