SMD5032 Datasheet, PDF (5/8 Pages) Shenzhen Luguang Electronic Technology Co., Ltd – SMD Quartz Crystal Resonator

SMD 5032(27M)
SMD Quartz Crystal Resonator
3.1 Mechanical characteristics
Provided that measurement shall be carried out after letting it alone in the room temperature for 1h.
Item
Specifications
1 Drop Test
Dropping 3 times from the height of 75cm onto hard wooden board of thickness
more than 30mm.
Mechanical
2
Shock
Devices are shocked to half sine wave (1000 G) three mutually perpendicular
axes each 3 times.
(1) Vibration Frequency 10~55Hz
(2) Cycle
1 to 2 min
3 Vibration
(3) Amplitude
1.0mm
(4) Direction
X.Y.Z
(5) Time
2hr for each direction
MIL - STD - 20E Method 208C
Temperature
245℃±5℃
4 Solderability
Material
H63A (Silver 2 ~ 3 %)
Immersion depth 0.5 mm minimum
Immersion time 3 ± 0.5 seconds
Flux
Rosin resin methyl alcohol solvent ( 1 : 4 )
Resistance to
MIL - SLD -202, Method 210, Condition I or J
5 Soldering
10 sec immersion into 260 ± 5℃ solder pot, above 180℃ is 90 ~ 120 sec.
Heat
*Frequency variation shall be within +/-5ppm and equivalent resistance less than ±15% max. after the test.
Note: Measuring the frequency should be done after keeping test samples at room temperature for 24 hours.
SHENZHEN LUGUANG ELECTRONIC TECHNOLOGY CO.,LTD.