Z4.0MT Datasheet, PDF (4/4 Pages) Shenzhen Luguang Electronic Technology Co., Ltd – Ceramic Resonator

Z4.0MT
Ceramic Resonator
6. PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
(Continued from the preceding page)
No
Item
6.9
6.9.1
6.9.2
Terminal
Strength
Terminal
Pulling
Terminal
Bending
Condition of Test
Performance
Requirements
No visible damage
and it shall fulfill
Force of 5N is applied to each lead in axial the specifications
direction for 10±1 sec.
in Table 1.
When force of 5N is applied to each lead in
axial direction,the lead shall folded up 90°
from the axial direction and folded back to
the axial direction. The speed of folding
shall be each 3 seconds.
Table 1
Item
Specification after test
Oscillation Frequency Change
Δfosc/fosc （%）max
±0.3（Refer to the initial value）
Resonant Impedance Ro（Ω）max
40
Note ： The limits in the above table are referenced to the initial
measurements.
7. REVIEW OF SPECIFICATIONS
When something gets doubtful with this specifications, we shall
jointly work to get an agreement.
http://www.luguang.cn
mail:[e-mail]