JT107MG3 Datasheet, PDF (2/7 Pages) Shenzhen Luguang Electronic Technology Co., Ltd – Ceramics discriminator for FM receiver

http://www.luguang.cn Email: [e-mail]
4. ELECTRICAL SPECIFICATIONS:
No
Item
4.1
Center Frequency fo (MHz)
Requirements
A：10.700±0.030 (RED)
Recovered Audio Voltage (at fo)
4.2
650
(mV) min
4.3 Distortion (at fo) (%) max
1.0
Recovered Audio 3dB Bandwidth
4.4
(kHz) min
±150
Temp. Coefficient of Frequency ±100 （Center Frequency drift，
4.5
(ppm/℃) max
-10℃～+70℃）
4.6 Insulation Resistance Ri,(MΩ)min
100 (100V，1min)
4.7
Withstanding Voltage
50VDC, 1min
5. MEASUREMENT:
Measurement Conditions: Parts shall be measured under a condition
( Temp. ： 20±15 ℃ ,Humidity ： 65±20% R.H.) unless the standard
condition(Temp. ： 25±2 ℃ ,Humidity ： 65±5% R.H.) is regulated to
measure.
Test Circuit:
VCC(12V)
0.01μ
IN
280Ω
9
1
6
7
10μ
TA7303P
8
3
25
OUT
Input Signal: Input Level：100dBμV
Modulation Frequency：1000Hz
Frequency Deviation：±75kHz
SHENZHEN LUGUANG ELECTRONIC TECHNOLOGY CO.,LTD.
2