CDBM450C24 Datasheet, PDF (2/2 Pages) Shenzhen Luguang Electronic Technology Co., Ltd – Ceramic Discriminator

CDBM450C24
Ceramic Discriminator
temperature. The discriminators shall meet the 2-1~2-4 electrical characteristics
are to be normal.
3-7) Lead Strength
The discriminators shall suffer no mechanical damage and meet the 2-1~2-4
electrical characteristics outlined on this specification after static load of 1.0 kg for
1 minute is applied in the direction of the insertion side.
3-8) Temperature
The discriminators shall be held at each cycle consist of three temperature
levels(-20,+25,+80℃) for a period of each 30 minute and repeated 3 cycles. After
the test the discriminators may be left for more than 24 hours at the room
temperature. The discriminators shall meet the 2-1~2-4 electrical characteristics
outlined on this specification and the appearance of discriminators is to be normal.
4. Appearance
4-1) Appearance and dimension may conform to Fig.1
4-2) Identification
The following shall be permanently and legibly marked.
5. Dimensions (unit mm)
Fig 1.
http://www.luguang.cn
mail:[e-mail]