SMCJ440A Datasheet, PDF (1/4 Pages) Shenzhen Luguang Electronic Technology Co., Ltd – 1500Watts Surface Mount Transient Voltage Suppressor

SMCJ SERIES
1500Watts Surface Mount Transient Voltage Suppressor
SMC/DO-214AB
Features
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps
from 0 volt to BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260^oC / 10 seconds at terminals
Plastic material used carries Underwriters
Laboratory Flammability Classification 94V-0
1500 watts peak pulse power capability with a 10
X 1000 us waveform by 0.01% duty cycle
Mechanical Data
Case: Molded plastic
Terminals: Pure tin plated lead free.
Polarity: Indicated by cathode band
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Units
Peak Power Dissipation at TA=25^oC, Tp=1ms (Note 1)
Steady State Power Dissipation
P_PK
Minimum 1500 Watts
Pd
6.5
Watts
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
I_FSM
200
Amps
Maximum Instantaneous Forward Voltage at 100.0A for
Unidirectional Only (Note 4)
V_F
3.5 / 5.0
Volts
Operating and Storage Temperature Range
T_J, T_STG
-55 to + 150
o_C
Notes: ^{1. Non-repetitive Current Pulse Per Fig. 3 and Derated above T}A^{=25oC Per Fig. 2.}
2. Mounted on 8.0mm² (.013mm Thick) Copper Pads to Each Terminal.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum.
4. VF=3.5V on SMCJ5.0 thru SMCJ90 Devices and VF=5.0V on SMCJ100 thru SMCJ170 Devices.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types SMCJ5.0 through Types SMCJ170.
2. Electrical Characteristics Apply in Both Directions.
http://www.luguang.cn
mail:[e-mail]