English
Language : 

SMBJ10A Datasheet, PDF (1/3 Pages) Shenzhen Luguang Electronic Technology Co., Ltd – 600Watts Surface Mount Transient Voltage Suppressor
SMBJ Series
600Watts Surface Mount Transient Voltage Suppressor
DO - 214AA(SMB)
4.7± 0.25
Features
• For surface mounted applications in order to optimize
board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition Rate (duty cycle): 0.01%
• Fast response time: typically less than 1.0ps from 0 Volts to
BV for unidirectional types
• Typical IR less than 1 mA above 10V
• High Temperature soldering: 250˚C/10 seconds at terminals
• Plastic packages has Underwriters Laboratory
Flammability 94V-O
Mechanical Data
• Case:JEDEC DO214AA. Molded plastic over glass passivated
junction
• Terminal: Solder plated, solderable per MIL-STD-750
Method 2026
• Polarity. Color band denotes positive end(cathode) except
Bidirectional
• Standard Packaging: 12mm tape(EIA STF RS-481)
• Weight: 0.003 ounce, 0.093 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types SMBJ5.0 thru types
SMBJ110(e.g. SMBJ5.OC, SMBJ170CA)
Electrical characteristics apply in both directions
5.4± 0.2
1.3± 0.2
0.2± 0.05
Dimensions in millimeters
MAXIMUM RATINGS @25˚C AMBIENT TEMPERATURE
AND CHARACTERISTICS (unless otherwise noted)
PARAMETER
SYMBOL VALUE UNIT
Peak pulse power Dissipation on
10/1000µs waveform
(note 1,2, FIG.1)
PPPM
Min
Watts
600
Peak pulse current of on 10\1000µs
waveform (note 1, FIG.3)
IPPM SEE TABLE 1 Amps
Peak forward Surge Current, 8.3ms
Single Half SIne Wave Superimposed
on Rated Load, (JEDEC Method)
(note 2.3)
IPSM
100
Amps
Operating junction and Storage
Temperature Range
-55 to +150
Tj, TsTG -55 to +150 °C
Note 1. Non-repetitive current pulse, per Fig.3 and derated above
TA= 25˚C per Fig.2
Note 2. Mounted on
5.0mm2(0.03mm
thick)
Copper
Pads
to
each
terminal
Note 3. 8.3 ms single half sine-wave, or equivalent square wave,
Duty cycle= 4 pulses per minute
http://www.luguang.cn
mail:lge@luguang.cn