SBR10U45SP5 Datasheet, PDF (1/2 Pages) Diodes Incorporated – 10A SBR® SUPER BARRIER RECTIFIER PowerDI®5

Features
• Designed as Bypass Diodes for Solar Panels
• Selectively Rated for 200ºC Maximum Junction Temperature for
High Thermal Reliability
• Patented Super Barrier Rectifier Technology
• High Forward Surge Capability
• Ultra Low Forward Voltage Drop
• Excellent High Temperature Stability
• Lead Free Finish, RoHS Compliant (Note 2)
SD10U45SL
10A SBR^®
SUPER BARRIER RECTIFIER
PowerDI^®5
Mechanical Data
• Case: PowerDI^®5
• Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Weight: 0.093 grams (approximate)
Top View
Bottom View
LEFT PIN
RIGHT PIN
BOTTOMSIDE
HEAT SINK
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
Maximum Ratings @T_A = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
V_RWM
45
V
V_RM
RMS Reverse Voltage
V_R(RMS)
32
V
Average Rectified Output Current
I_O
10
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I_FSM
275
A
Thermal Characteristics
Characteristic
Maximum Thermal Resistance
Thermal Resistance Junction to Ambient (Note 3)
Thermal Resistance Junction to Ambient (Note 4)
Operating Temperature Range
Storage Temperature Range
V_R ≤ 80% V_RRM
V_R ≤ 50% V_RRM
DC Forward Mode
Symbol
R_θJA
R_θJA
T_J
T_STG
Value
73
31
-65 to +150
≤180
≤200
-65 to +175
Unit
ºC/W
ºC
ºC
Electrical Characteristics @T_A = 25°C unless otherwise specified
Characteristic
Symbol
Min
Typ
Max
Unit
Test Condition
Reverse Breakdown Voltage (Note 1)
V_(BR)R
45
-
Forward Voltage Drop
V_F
-
-
Leakage Current (Note 1)
-
I_R
-
-
-
-
-
0.42
0.42
0.47
0.38
0.41
0.05
0.3
-
15
28.0
75
V
I_R = 0.3mA
I_F = 8A, T_J = 25ºC
V
I_F = 10A, T_J = 25ºC
I_F = 10A, T_J = 125ºC
V_R = 45V, T_J = 25ºC
mA
V_R = 45V, T_J = 100ºC
V_R = 45V, T_J = 150ºC
Notes:
1. Short duration pulse test used to minimize self-heating effect.
2. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Polymide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 14.4mm.
http://www.luguang.cn
Email:[e-mail]