|
SA5.0 Datasheet, PDF (1/3 Pages) First Components International – 5.0V to 170V GPP TRANSIENT VOLTAGE SUPPRESSORS | |||
|
SA5V0(C)A-SA170(C)A
500W Transient Voltage Suppressor
DO-15
Features
 Constructed with Glass Passivated Die
 Excellent Clamping Capability
 500W Peak Pulse Power Dissipation
 Fast Response Time
100% Tested at Rated Peak Pulse Power
 Voltage Range 5.0 - 170 Volts
 Unidirectional and Bi-directional Versions
 Available (Note 1)
Mechanical Data
 Case: Transfer Molded Epoxy
 Plastic Case Material has UL Flammability
Classification Rating 94V-0
 Moisture sensitivity: Level 1 per J-STD-020A
 Leads: Plated Leads, Solderable per
MIL-STD-202, Method 208
 Marking: Unidirectional: Type Number and
Cathode Band
 Marking Bi-directional: Type Number Only
 Approx. Weight: 0.4 grams
Dimensions in inches and (millimeters)
Maximum Ratings @ TA = 25°C unless otherwise specified
Characteristic
Symbol
Value
Unit
Peak Power Dissipation, Tp = 1.0ms
(Non repetitive current pulse, derated above TA = 25°C)
Ppk
500
W
Steady State Power Dissipation at TL = 75°C
Lead Lengths 9.5 mm (Board mounted)
Pd
1.0
W
Peak Forward Surge Current, 8.3 Single Half Sine Wave
Superimposed on Rated Load
IFSM
70
A
Duty Cycle = 4 pulses per minute maximum
Forward Voltage @ IF = 35A 300µs Square Wave Pulse,
Unidirectional Only
VF
3.5
V
Operating and Storage Temperature Range
TJ, TSTG
-65 to +175
°C
Notes: 1. Suffix âAâ denotes unidirectional, suffix âCAâ denotes bi-directional device.
2. For bi-directional devices having VR of 10 volts and under, the IR limit is doubled.
http://www.luguang.cn
mail:lge@luguang.cn
|
▷ |