|
MBRF10H100CT Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Isolated 10.0 AMPS. Schottky Barrier Rectifiers | |||
|
MBRF10H100CT-MBRF10H200CT
Isolated 10.0AMP.Schottky Barrier Rectifiers
ITO-220AB
Features
 Plastic material used carries Underwriters Laboratory
Classifications 94V-0
 Metal silicon junction, majority carrier conduction
 Low power loss, high efficiency
 High current capability, low forward voltage drop
 High surge capability
 For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
 Guardring for overvoltage protection
 High temperature soldering guaranteed:
260oC/10 seconds,0.25â(6.35mm)from case
Mechanical Data
 Cases: ITO-220AB molded plastic
 Polarity: As marked
 Mounting position: Any
 Mounting torque: 5 in. - lbs. max
 Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol
MBRF
10H100CT
MBRF
10H150CT
MBRF
10H200CT
Maximum Recurrent Peak Reverse Voltage VRRM
100
150
200
Maximum RMS Voltage
VRMS
70
105
140
Maximum DC Blocking Voltage
VDC
100
150
200
Maximum Average Forward Rectified
Current at TC=125oC
I(AV)
10
Peak Repetitive Forward Current (Rated VR,
Square Wave, 20KHz) at Tc=133oC
IFRM
10
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
120
Load (JEDEC method )
Peak Repetitive Reverse Surge Current
(Note 1)
Maximum Instantaneous Forward Voltage at
(Note 2)
IF= 5A, Tc=25oC
IIIFFF===11500AAA,,,TTTccc===11222555ooCoCC
IRRM
VF
1.0
0.85
0.75
0.95
0.85
0.5
0.88
0.75
0.97
0.85
Maximum Instantaneous Reverse Current
at Rated DC Blocking Voltage @Tc=25 oC
@ Tc=125 oC
IR
5.0
1.0
Units
V
V
V
A
A
A
A
V
uA
mA
Voltage Rate of Change, (Rated VR)
dV/dt
10,000
RMS Isolation Voltage (t=1.0 second, R.H.
â¦30%, TA=25 oC)
(Note 4)
(Note 5)
VISO
4500
3500
(Note 6)
1500
Typical Thermal Resistance Per Leg (Note3) RθJC
3.5
Operating Junction Temperature Range
TJ
-65 to +175
Storage Temperature Range
TSTG
-65 to +175
Notes: 1. 2.0 us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg.
4. Clip Mounting (on case), where lead does not overlap heatsink with 0.110â offset.
5. Clip mounting (on case), where leads do overlap heatsink.
6. Screw mounting with 4-40 screw, where washer diameter is â¦4.9 mm (0.19â)
V/uS
V
oC/W
oC
oC
http://www.luguang.cn
mail:lge@luguang.cn
|
▷ |