MBR2035CT Datasheet, PDF (1/2 Pages) Motorola, Inc – SWITCHMODE™ Power Rectifiers

MBR2035CT THRU MBR20200CT
ITO-220AB
Features
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Guardring for overvoltage protection
High temperature soldering guaranteed:
260^oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
Cases: JEDEC TO-220 molded plastic
Terminals: Leads solderable per MIL-STD-750, Method
2026
Polarity: As marked
Mounting position: Any
Mounting torque: 5 in. - lbs. max
Weight: 0.08 ounce, 2.24 grams
10.2± 0.2
4.5± 0.2
3.1^+-00..12
PIN
1 23
4.0± 0.3
1.4± 0.1
0.6± 0.1
2.6± 0.15
2.6± 0.2
0.6± 0.1
Dimensions in millimeters
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{MBR20 MBR20 MBR20 MBR20 MBR20 MBR20 MBR20} Units
35CT 45CT 50CT 60CT 100CT 150CT 200CT
Maximum Recurrent Peak Reverse Voltage
VRRM
35
45
50
60 100 150 200
V
Maximum RMS Voltage
VRMS
24
31
35
42
70 105 140
V
Maximum DC Blocking Voltage
VDC
35 45 50 60 100 150 200
V
Maximum Average Forward Rectified Current
at TC=135^oC
I(AV)
20
A
Peak Repetitive Forward Current (Rated VR,
Square Wave, 20KHz) at Tc=135^oC
IFRM
20.0
A
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC _IFSM
150
A
method )
Peak Repetitive Reverse Surge Current (Note 1) I_RRM
1.0
0.5
1.0
A
Maximum Instantaneous Forward Voltage at (Note 2)
IF=10A, TC=25^OC
IF=10A, TC=125^OC
VF
-
0.57
0.79
0.67
0.80
0.68
0.82
0.70 V
Maximum Instantaneous Reverse Current @ Tc=25℃
at Rated DC Blocking Voltage
@ Tc=125℃
IR
0.1
0.15
15
Voltage Rate of Change, (Rated VR)
Typical Junction Capacitance
dV/dt
Cj
400
10,000
320
Typical Thermal Resistance Per Leg (Note 3)
RθJC
1.0
Operating Junction Temperature Range
TJ
-65 to +150
Storage Temperature Range
TSTG
-65 to +175
Notes: 1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg, with Heatsink Size (4”x6”x0.25”) Al-Plate.
1.0
20
2.0
mA
mA
V/uS
pF
℃/W
℃
℃
http://www.luguang.cn
mail:[e-mail]