English
Language : 

GL41A Datasheet, PDF (1/2 Pages) First Components International – 1.0 Amp MEGARECTIFIERS
GL41A-GL41Y
Surface Mount Rectifiers
VOLTAGE RANGE: 50 --- 1600 V
CURRENT: 1.0 A
Features
— Plastic package has underwriters laboratories
flammability classification 94V-0
— Glass passivated chip junction
— For surface mount applications
— High temperature metallurgically bonded construction
— Cavity-free glass passivated junction
— High temperature soldering guaranteed:450 ℃/5
seconds at terminals.Complete device sub-mersible
temperature of 265℃ for 10 seconds in solder bath
Mechanical Data
— Case: JEDEC DO-213AB,molded plastic
— Polarity: Color band denotes cathode
— Weight: 0.0046 ounces, 0.116 grams
— Mounting position: Any
DO - 213AB
SOLDERABLE ENDS
D2=D1
Đ0
Ē0.20
D2
0.5± 0.1
4.9± 0.2
0.5± 0.1
Dimensions in millimeters
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate current by 20%.
GL
41A
GL
41B
GL
41D
GL
41G
GL
41J
GL
41K
GL
41M
GL
41T
GL
41Y
UNITS
Maximum recurrent peak reverse voltage
VRRM 50 100 200 400 600 800 1000 1300 1600 V
Maximum RMS voltage
Maximum DC blocking voltage
VRMS
VDC
35 70 140 280 420 560 700 910 1120 V
50 100 200 400 600 800 1000 1300 1600 V
Maximum average forward rectified current
(see FIG.1)
I(AV)
1.0
A
Peak forward surge current
8.3ms single half-sine-wave
IFSM
30
A
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage
@1.0A
VF
1.1
1.2
V
Maximum reverse current
@TA=25℃
at rated DC blocking voltage @TA=125℃
Typical junction capacitance (Note1)
Typical thermal resistance (Note 2)
Operating junction temperature range
Storage temperature range
IR
Cj
RθJA
Tj
TSTG
10
50
8.0
75
- 55 ---- +175
- 55 ---- +175
NOTE: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2. Thermal resistance from junction to ambient, 0.24×0.24"(6.0×6.0mm) copper pads to each terminal.
µA
pF
℃/W
℃
℃
http://www.luguang.cn
mail:lge@luguang.cn