GBU401 Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers

GBU401-GBU407
Single Phase 4.0AMP.Glass Passivated Bridge Rectifiers
GBU
Features
Ideal for printed circuit board
Reliable low cost construction
Plastic material has Underwriters Laboratory
Flammability Classification 94V-0
High case dielectric strength of 1500VRMS
Surge overload rating to 150 amperes peak
High temperature soldering guaranteed:
260^oC / 10 seconds / .375”, (9.5mm) lead
lengths at 5 lbs., (2.3kg) tension
Mechanical Data
Case: Molded plastic body
Weight: 0. 3 ounce, 8.0 grams
Mounting torque: 5 in. lbs. Max.
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol GBU GBU GBU GBU GBU GBU GBU Units
401 402 403 404 405 406 407
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TC = 100 ^oC
I_(AV)
4.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sne-wave Superimposed on Rated Load I_FSM
150
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 2.0A
V_F
@ 4.0A
Maximum DC Reverse Current @ TA=25 ^oC
at Rated DC Blocking Voltage @ TA=125 ^oC
I_R
Typical Junction Capacitance (Note 3)
Cj
1.0
1.1
V
5.0
uA
500
uA
100
45
pF
Typical Thermal Resistance (Note 1)
(Note 2)
R_θJA
R_θJC
20
4.0
o_C/W
Operating Temperature Range
TJ
-55 to +150
o_C
Storage Temperature Range
TSTG
-55 to + 150
o_C
Notes:
1. Mounted on P.C.B. with 0.5” x 0.5” (12mm x 12mm) Copper Pads and 0.375” 9.5mm) Lead Length. 2.
Mounted on Al. Plate of 2” x 3” x 0.25” Al-Plate Heatsink.
3. Measured at 1.0MHZ and Applied Reverse Voltage of 4.0 Volts.
http://www.luguang.cn
mail:[e-mail]