FS3A Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SURFACE MOUNT SUPER FAST RECTIFERS

FS3A-FS3M
3.0AMPS. Surface Mount Fast Recovery Rectifiers
SMC/DO-214AB
Features
For surface mounted application
Glass passivated junction chip
Built-in strain relief, ideal for automated
placement
Plastic material used carries Underwriters
Laboratory Classification 94V-0
Fast switching for high efficiency
High temperature soldering:
260^oC /10 seconds at terminals
Mechanical Data
Cases: Molded plastic
Terminals: Pure tin plated, Lead free.
Polarity: Indicated by cathode band
Weight: 0.21 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{FS FS FS FS FS FS FS} Units
3A 3B 3D 3G 3J 3K 3M
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
V_RRM
50 100 200 400 600 800 1000
V
V_RMS
35 70 140 280 420 560 700
V
V_DC
50 100 200 400 600 800 1000
V
Maximum Average Forward Rectified Current
See Fig. 1 @TL=75^oC
I_(AV)
3.0
A
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
I_FSM
100
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 3.0A
V_F
1.3
V
Maximum DC Reverse Current @ TA =25 ^oC
at Rated DC Blocking Voltage @ TA=125 ^oC
I_R
Maximum Reverse Recovery Time ( Note 1 )
Trr
10
uA
250
uA
150
250
500
nS
Typical Junction Capacitance ( Note 2 )
Cj
60
pF
Typical Thermal Resistance (Note 3)
Operating Temperature Range
Storage Temperature Range
R_θJA
R_θJL
TJ
TSTG
50
15
-55 to +150
-55 to +150
o_C/W
o_C
o_C
Notes:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied VR=4.0 Volts
3. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with
0.6” x 0.6” ( 16mm x 16 mm ) Copper Pad Areas.
http://www.luguang.cn
mail:[e-mail]