FRF501G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Isolation 5.0 AMPS. Glass Passivated Fast Recovery Rectifiers

FRF501G-FRF507G
Isolated5.0AMP.Glass Passivated Fast Recovery Rectifiers
ITO-220AB
Features
Glass passivated chip junction.
High efficiency, Low VF
High current capability
High reliability
High surge current capability
Low power loss
Mechanical Data
Cases: ITO-220AB molded plastic
Epoxy: UL 94V-0 rate flame retardant
Polarity: As marked
High temperature soldering guaranteed:
260 ^oC /10 seconds 0.25”,(6.35mm) from
case.
Mounting position: Any
Weight: 2.24 grams
Mounting torque: 5 in – 1bs. max.
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{FRF FRF FRF FRF FRF FRF} FRF
501G 502G 503G 504G 505G 506G 507G
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000
Maximum Average Forward Rectified Current
See Fig. 1
I_(AV)
5.0
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
30
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 2.5A
V_F
1.5
Maximum DC Reverse Current
@TC=25 ^oC at Rated DC Blocking Voltage
I_R
@ TC=125 ^oC
Maximum Reverse Recovery Time (Note1)
Trr
5.0
100
150
250
500
Typical Junction Capacitance ( Note 2 )
Cj
140
Typical Thermal Resistance ( Note 3 )
R_θJC
4.0
Operating and Storage Temperature Range TJ, TSTG
-65 to +150
Notes:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1MHz and Applied Reverse Voltage of 4.0 Volts D.C.
3. Mount on Heatsink Size 2” x 3” x 0.25” Al-Plate.
Units
V
V
V
A
A
V
uA
uA
nS
pF
o_C/W
o_C
http://www.luguang.cn
mail:[e-mail]