FRAF1601G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Isolation 16.0 AMPS. Glass Passivated Fast Recovery Rectifiers

FRAF1601G-FRAF1607G
Isolated 16.0AMP. Glass Passivated Fast Recovery Rectifiers
ITO-220AC
Features
Glass passivated chip junction.
High efficiency, Low VF
High current capability
High reliability
High surge current capability
Low power loss
Mechanical Data
Cases: ITO-220AC molded plastic
Epoxy: UL 94V-0 rate flame retardant
Polarity: As marked
High temperature soldering guaranteed:
260 ^oC /10 seconds 0.25”,(6.35mm) from
case.
Mounting position: Any
Weight: 2.24 grams
Mounting torque: 5 in – 1bs. max.
.185(4.7)
.173(4.4)
.124(3.16)
.118(3.00)
.406(10.3)
.390(9.90)
.134(3.4)DIA
.113(3.0)DIA
.272(6.9)
.248(6.3)
.112(2.85)
.100(2.55)
.606(15.5)
.583(14.8)
.063(1.6)
MAX
.110(2.8)
.098(2.5)
.030(0.76)
.020(0.50)
.055(1.4)
.043(1.1)
.035(0.9)
.020(0.5)
.161(4.1)
.146(3.7)
.071(1.8) .543(13.8)
MAX
.512(13.2)
2
.100(2.55)
.100(2.55)
PIN 1
PIN 2
CASE
Case Positive
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{FRAF FRAF FRAF FRAF FRAF FRAF FRAF} Units
1601G 1602G 1603G 1604G 1605G 1606G 1607G
Maximum Recurrent Peak Reverse Voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
See Fig. 1
I_(AV)
16.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load I_FSM
250
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 16.0A
V_F
Maximum DC Reverse Current @ TC=25 ^oC
at Rated DC Blocking Voltage @ TC=125 ^oC
I_R
1.3
V
5.0
uA
100
uA
Maximum Reverse Recovery Time ( Note 1)
Trr
150
250
500
nS
Typical Junction Capacitance (Note 3)
Cj
70
pF
Typical Thermal Resistance RθJC (Note 2)
R_θJC
4.5
Operating and Storage Temperature Range TJ, TSTG
-65 to +150
Notes:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.
2. Thermal Resistance from Junction to Case Per Leg Mounted on Heatsink Size
2” x 3” x 0.25” Al-Plate.
3. Measured at 1MHz and Applied Reverse Voltage of 4.0 Volts D.C.
o_C/W
o_C
http://www.luguang.cn
mail:[e-mail]